12x37x12, 6301-2RS, 6301-ZZ Premium Ball Bearings - 6301 2rs
These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.
The Deep Groove Ball Bearing, known as 6308-ZZ-C4-SKF SKF, has an inner diameter of 40 mm, an outer diameter of 90 mm and a thickness of 23 mm.
The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.
A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".
The 70-A 8883-piece ball bearing puller set is used for non-destructive removal of deep groove ball bearings without disassembly of the shaft in crafts, industry, and workshop. With these pullers, bearings that are simultaneously seated in a housing and on a shaft can be easily and quickly removed and, if not already damaged beforehand, can be reused. The series 70 impresses with its specially developed jaws for precise installation in the bearing raceways, enabling safe removal of small to large bearings.
You have questions about the application of the product? You are not sure which item you need? No problem! Just write us a message and we will be happy to help you!
I accept to receive e-mails and/or text messages. I understand that I can unsubscribe at any time after I have registered.
Do you have a request? We will help you with your request, and work together for the correct solution. Please choose one option to contact us:
Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.
Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.
The Deep Groove Ball Bearing, known as 6308-ZZ-C4-SKF SKF, has an inner diameter of 40 mm, an outer diameter of 90 mm and a thickness of 23 mm.
In this video you will find all information regarding our ball bearing puller set for ball bearings 70-A in the innovative Sortimo L-Boxx. We show you how to use the product and what advantages you can gain from the 70-A.
Our professional distributors are available for on-site support and personal advice. Thanks to our global network, you are sure to find a partner just around the corner.
These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.
These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".
This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.
The Deep Groove Ball Bearing, known as 6308-ZZ-C4-SKF SKF, has an inner diameter of 40 mm, an outer diameter of 90 mm and a thickness of 23 mm.