6205 NSK Open Deep Groove Ball Bearing 25mm inside x ... - 25 * 62 * 15 bearing
This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.
16002 15x32x8mm NSK Single Row Deep Groove Ball BearingInside Diameter: 15mmOutside Diameter: 32mmWidth: 8mmPlease Note: If the selected brand is n...
16002-2RS 15x32x8mm ZEN Deep Groove Ball BearingInside Diameter (mm):15Outside Diameter (mm):32Width (mm):8Please Note: Should the selected brand n...
1310-TN 50x110x27mm ZEN Deep Groove Ball BearingInside Diameter (mm):50Outside Diameter (mm):110Width (mm):27Please Note: Should the selected brand...
A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".
120-BA-16 120x165x22mm ZEN Deep Groove Ball BearingInside Diameter (mm):120Outside Diameter (mm):165Width (mm):22Please Note: Should the selected b...
16002-2Z 15x32x8mm SKF Single Row Deep Groove Ball BearingSingle Row Deep Groove Ball BearingMetric, Bearing, Bearing Steel, Metal Shield On Both S...
Deep groove ball bearings are manufactured by Bolton Engineering Products Ltd in a variety of configurations. These bearings are the most widely utilized and can be found in a wide range of applications. We provide them to you at a very affordable price. Make sure to place your order today!
16002 15x32x8mm SKF Single Row Deep Groove Ball BearingSingle Row Deep Groove Ball BearingMetric, Bearing, Bearing Steel, Open (No Seal), Normal Cl...
16002-2RS 15x32x8mm Timken Single Row Deep Groove Ball BearingInside Diameter:15mmOutside Diameter: 32mmWidth: 8mmPlease Note: If the selected bran...
Deep groove ball bearings are the most extensively used bearing type, and they are also one of the most adaptable types available. High rotating speeds are made possible by their low friction and their specialization for minimal noise and vibration. They can accommodate radial and axial stresses in both directions, and they are less complicated to install and maintain than other bearing types.
16001JRX 12x28x7mm NTN Open Type Deep Groove Ball Bearing Inside Diameter (mm):12 Outside Diameter (mm):28 Width (mm):7 Please Note: Should the se...
These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.
16002-A-C3 15x32x8mm Single Row Deep Groove Ball BearingInside Diameter (mm):15Outside Diameter (mm):32Width (mm):8Please Note: If selected brand i...
The Deep Groove Ball Bearing, known as 6205-LLU-C3-5K-NTN NTN, has an inner diameter of 25 mm, an outer diameter of 52 mm and a thickness of 15 mm.
16002-A-2Z 15x32x8mm Single Row Deep Groove Ball BearingInside Diameter (mm):15Outside Diameter (mm):32Width (mm):8Please Note: If selected brand i...
15267-2RS 15x26x7mm ZEN Deep Groove Ball BearingInside Diameter (mm):15Outside Diameter (mm):26Width (mm):7Please Note: Should the selected brand n...
The Deep Groove Ball Bearing, known as 6205-LLU-C3-5K-NTN NTN, has an inner diameter of 25 mm, an outer diameter of 52 mm and a thickness of 15 mm.
The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.
Deep groove ball bearings are manufactured by Bolton Engineering Products Ltd in a variety of configurations. These bearings are the most widely utilized and can be found in a wide range of applications. We provide them to you at a very affordable price. Make sure to place your order today!
Bolton Engineering stock a full range of Bearings, Chains, Pulleys, Sprockets, Couplings, Shaft fixings, Oil seals, O-rings, HTD Timing belts and pulleys, Imperial timing belts and pulleys, Housed bearings
15267 15x26x7mm ZEN Deep Groove Ball BearingInside Diameter (mm):15Outside Diameter (mm):26Width (mm):7Please Note: Should the selected brand not b...
Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.
These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".
16001-2RS 12x28x7mm ZEN Deep Groove Ball BearingInside Diameter (mm):12Outside Diameter (mm):28Width (mm):7Please Note: Should the selected brand n...
16001-ZZ 12x28x7mm ZEN Deep Groove Ball BearingInside Diameter (mm):12Outside Diameter (mm):28Width (mm):7Please Note: Should the selected brand no...
Deep groove ball bearings are the most extensively used bearing type, and they are also one of the most adaptable types available. High rotating speeds are made possible by their low friction and their specialization for minimal noise and vibration. They can accommodate radial and axial stresses in both directions, and they are less complicated to install and maintain than other bearing types.
These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.
The Deep Groove Ball Bearing, known as 6205-LLU-C3-5K-NTN NTN, has an inner diameter of 25 mm, an outer diameter of 52 mm and a thickness of 15 mm.
16002-2RS-INOX 15x32x8mm ZEN Deep Groove Ball BearingInside Diameter (mm):15Outside Diameter (mm):32Width (mm):8Please Note: Should the selected br...
Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.
16002-A 15x32x8mm Single Row Deep Groove Ball BearingInside Diameter (mm):15Outside Diameter (mm):32Width (mm):8Please Note: If selected brand is n...
16001 12x28x7mm NSK Single Row Deep Groove Ball BearingInside Diameter: 12mmOutside Diameter: 28mmWidth: 7mmPlease Note: If the selected brand is n...
16002 15x32x8mm Timken Single Row Deep Groove Ball BearingInside Diameter:15mmOutside Diameter: 32mmWidth: 8mmPlease Note: If the selected brand is...
16001JRXC3 12x28x7mm NTN Open Type Deep Groove Ball Bearing Inside Diameter (mm):12 Outside Diameter (mm):28 Width (mm):7 Please Note: Should the ...
16002 15x32x8mm NTN Open Type Deep Groove Ball Bearing Inside Diameter (mm):15 Outside Diameter (mm):32 Width (mm):8 Please Note: Should the selec...