This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

Image

The Deep Groove Ball Bearing, known as 6207-ZZ-ZEN ZEN, has an inner diameter of 35 mm, an outer diameter of 72 mm and a thickness of 17 mm.

32oz Water Bottle Throw Blanket 30 piece Hex Set Telescopic Pick Up

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

The Deep Groove Ball Bearing, known as 6207-ZZ-ZEN ZEN, has an inner diameter of 35 mm, an outer diameter of 72 mm and a thickness of 17 mm.

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum

The Deep Groove Ball Bearing, known as 6207-ZZ-ZEN ZEN, has an inner diameter of 35 mm, an outer diameter of 72 mm and a thickness of 17 mm.

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

Specifications Inner Diameter (mm) 30.000 Outer Diameter (mm) 62.000 Width (mm) 16.000 Material/Treatment Bearing steel Cage Sheet metal Sealing Seal on both sides Seal Type Contact Dimension Type Metric Locating Feature Bearing None Lubricant (in Bearing) Grease Bore Type Cylindrical Radial Internal Clearance C0 Relubrication Feature Without

Golf Cooler 11-in-1 Screw Driver Set Gorilla Grip Knee Pad John Deere Oilskin Hat

Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF

Igloo 10 Gallon Cooler Igloo Party Bucket Cooler Klein Tools Speaker Klein Tools 8-in-1

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

Image

When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.

GX-6F Pro Golf Range Finder Bushnell Outdoorsman Speaker Jaeger 24px Ratcheting Wrench Set Aspen Beverage Bucket

Image

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.