Image

NTN 6005Z 60 Series Round Bore Standard Small Deep Groove Radial Ball Bearing, 25 mm Dia Bore, 47 mm OD, 1 Rows, 12 mm W, 10100 N Load

Deep groove ball bearings are very widely used. A deep groove is formed on each inner and outer ring of the bearing enabling them to sustain radial and axial loads in either direction as well as well as the complex loads which result from the combination of these forces. Deep groove ball bearings are suitable for high speed applications.

- Primarily intended for applications where the bearing inner ring rotates- Fitted in the outer ring and form a narrow gap with the inner ring- Both standard and C3 clearance available - Protect from dirt and debris without friction lossesApplication Information-Food and Beverage Industry-Pharmaceutica-Medical industry-Engines and Pumps-Medical Industry-PrintingMore InformationWhat are deep groove ball bearings?These are the most popular type of bearings and consists of an inner ring, outer ring, cage and the ball bearings. The bearings have deep raceway grooves. These type of bearings deliver high performance and high load capacity.Why used shielded ball bearings?Shielded ball bearings have a metal or plastic shield that is secured to the outer race of the bearing on each side of the bearing. Ball bearings that spin at high speeds require lubrication and a clean environment By having the ball bearings shielded this offers better protection against dirt and grease therefore the ball bearings have a longer lifespan.

Image

SKF shielded deep groove ball bearings are versatile ball bearings that suit high and very high speeds, they will accommodate both radial load and axial load in both directions. The ball bearings need very little maintenance. SKF deep groove ball bearings come in a range of different sizes. This range is single row ball bearings.Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals.

Image

- Primarily intended for applications where the bearing inner ring rotates- Fitted in the outer ring and form a narrow gap with the inner ring- Both standard and C3 clearance available - Protect from dirt and debris without friction lossesApplication Information-Food and Beverage Industry-Pharmaceutica-Medical industry-Engines and Pumps-Medical Industry-PrintingMore InformationWhat are deep groove ball bearings?These are the most popular type of bearings and consists of an inner ring, outer ring, cage and the ball bearings. The bearings have deep raceway grooves. These type of bearings deliver high performance and high load capacity.Why used shielded ball bearings?Shielded ball bearings have a metal or plastic shield that is secured to the outer race of the bearing on each side of the bearing. Ball bearings that spin at high speeds require lubrication and a clean environment By having the ball bearings shielded this offers better protection against dirt and grease therefore the ball bearings have a longer lifespan.

SKF shielded deep groove ball bearings are versatile ball bearings that suit high and very high speeds, they will accommodate both radial load and axial load in both directions. The ball bearings need very little maintenance. SKF deep groove ball bearings come in a range of different sizes. This range is single row ball bearings.Shielded (2Z) bearings are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter. 2RZ bearings are 2Z bearings fitted with two low friction seals.

NTN Deep Groove Radial Ball Bearing, Round Bore Standard Small, Series: 60 Series, 25 mm Bore, 47 mm OD, 1 Rows, 12 mm Width, Single Shield Closure, 10100 N Load, High Carbon Chrome Steel Bearing, Pressed Steel Cage, 15000 rpm Grease/18000 rpm Oil Maximum, -40 to 120 deg C