6312-ZZ-C3-FAG Ball Bearing 60x130x31 - 6312 bearing
A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".
Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.
The Deep Groove Ball Bearing, known as 6305-C3-SKF SKF, has an inner diameter of 25 mm, an outer diameter of 62 mm and a thickness of 17 mm.
Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.
This product requires a choice of personalization above, please select your choice to allow the addition of this product to the cart.
We are at the service of lovers of 2 wheels: scooters, mopeds, 50cc gearbox, and also the mini 4-stroke. We mainly market tuning parts and accessories alone or in kit for the most classic scooters like the Booster, Nitro / Aerox, Peugeot Speedfight and Ludix but also for more recent brands, CPI, Keeway, Beeline, TNT, etc. The Derbi Senda, GPR, Aprilia RS and Yamaha TZR-DTR and other mechanics are not forgotten. 4-stroke enthusiasts will also find happiness in the choice of engines and parts for Honda Dax, Skyteam 125, Monkey and related. We are always looking to offer the best value for money, which brings us to distribute major continental brands such as Malossi, Polini, Athena, Dellorto, TNT, Leovince, Bidalot, Conti but we also import from Japan prestigious labels like Kitaco, Takegawa , G Craft.
These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.
The Deep Groove Ball Bearing, known as 6305-C3-SKF SKF, has an inner diameter of 25 mm, an outer diameter of 62 mm and a thickness of 17 mm.
The Deep Groove Ball Bearing, known as 6305-C3-SKF SKF, has an inner diameter of 25 mm, an outer diameter of 62 mm and a thickness of 17 mm.
Motorkit 2 scrl 12 rue des français 4430 Ans Belgium Phone : +32.(0)4.226.51.84 Email : motorkit@motorkit.com VAT BE 0442.807.275
This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.
These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".
These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.
Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.
The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.