NPB provides innovative solutions to customers across an array of specialized industries where in-depth knowledge is essential.

The Deep Groove Ball Bearing, known as 6306-32-2RS-C4-KOYO JTEKT, has an inner diameter of 32 mm, an outer diameter of 72 mm and a thickness of 19 mm.

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

The Deep Groove Ball Bearing, known as 6306-32-2RS-C4-KOYO JTEKT, has an inner diameter of 32 mm, an outer diameter of 72 mm and a thickness of 19 mm.

Since 1979, we’ve been committed to continuous learning and applying that knowledge to help our customers and partners achieve greater success.

V-groove bearings are precision ground, double row, angular contact bearings. The concentric and adjustable bushings provide a simple, effective means of adjusting the free play of the guide wheel system. Ideal for linear motion applications where the bearing runs along a rail or track as well as cable guide applications. Types:  V-groove, U-groove, G-groove, guide wheelConfigurations: Sealed, Shielded, openMaterials:  52100 steel, stainless steelNPB offers concentric and adjustable configurations, single and double row, in both inch and metric sizes from stock.Typical applications include:• Robotics• Material handling• Door actuation• Pulleys• Specialty applications

Image

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

The NPB sales & support teams are renowned across the industry for their professionalism, expertise and dedication to our customers’ success.

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

Types:  V-groove, U-groove, G-groove, guide wheelConfigurations: Sealed, Shielded, openMaterials:  52100 steel, stainless steelNPB offers concentric and adjustable configurations, single and double row, in both inch and metric sizes from stock.Typical applications include:• Robotics• Material handling• Door actuation• Pulleys• Specialty applications

Anything you need, any questions or concerns you have, you can ask us here. An NPB team member will get back to you promptly.

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

Image

The Deep Groove Ball Bearing, known as 6306-32-2RS-C4-KOYO JTEKT, has an inner diameter of 32 mm, an outer diameter of 72 mm and a thickness of 19 mm.

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.