These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.

The Deep Groove Ball Bearing, known as 6004-2RS1-C3-SKF SKF, has an inner diameter of 20 mm, an outer diameter of 42 mm and a thickness of 12 mm.

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

Image

As Galata Ship Supply, we would like to introduce ourselves as the best fit to provide ship supply and technical services during your calls.

Image

Image

These are the most widely used ball bearing types which incorporate deep, uninterrupted raceways making the bearing suitable for radial loads or a combination of radial and thrust loads in either direction. The simple symmetrical design of these bearings makes them easy to refine to super-precision tolerance for operations at high speed. Series 6300-2RS Two-Side Sealed

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

The Deep Groove Ball Bearing, known as 6004-2RS1-C3-SKF SKF, has an inner diameter of 20 mm, an outer diameter of 42 mm and a thickness of 12 mm.

To be the best Diesel Partners with 4(four) core supply scope in Marine Business! 1. DIESEL ENGINE SPARE PARTS - MAN B&W ENGINE SPARES (LOW SPEED DIESEL ENGINE) L/S/K98MC/E,90MC,80MC,70MC,60MC,50MC,46MC,42MC,35MC,26MC

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

The Deep Groove Ball Bearing, known as 6004-2RS1-C3-SKF SKF, has an inner diameter of 20 mm, an outer diameter of 42 mm and a thickness of 12 mm.

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.