A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

Image

The Deep Groove Ball Bearing, known as 6306-ZZ-SKF SKF, has an inner diameter of 30 mm, an outer diameter of 72 mm and a thickness of 19 mm.

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

Image

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

Image

The Deep Groove Ball Bearing, known as 6306-ZZ-SKF SKF, has an inner diameter of 30 mm, an outer diameter of 72 mm and a thickness of 19 mm.

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

6202-ZZ is a Precision Metric Ball Bearing manufactured to have Metal Shields on both sides and is pre-lubricated with Grease, allowing for use upon delivery. Made from Chrome Steel, 6202-ZZ is a Metric Ball Bearing that can withstand both moderate radial and axial loads while providing high performance. Our 6200 Series Light Duty Ball Bearings are designed with deep, close-contoured races to offer a perfectly balanced bearing with the capacity to carry radial, thrust or combined loads.

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

The Deep Groove Ball Bearing, known as 6306-ZZ-SKF SKF, has an inner diameter of 30 mm, an outer diameter of 72 mm and a thickness of 19 mm.

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

6202-ZZ Metric Ball Bearings are used to balance space and load capacity including applications such as ATVs, Snowmobiles, HVAC Systems, Furniture, Electric Fans, Robotics, Sporting Machines, Motorcycles, Textile Machines, Light-duty Industrial Applications, Conveyors, Automotives, among others.

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.