Bimetal and metal bearings offer excellent corrosion resistance in industrial outdoor applications and in water, marine and offshore environments. GGB offers a broad range of sizes, forms and materials in monometallic and bimetallic bearings.

Deep groove ball bearings come in many sizes, materials and varieties according to consumer needs, including special industrial uses such as high-temperature applications. High-temperature bearings are made to withstand temperatures up to 350°C (660°F) and are suitable for machines used in the metals industry or for industrial ovens.

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

The Deep Groove Ball Bearing, known as 6205-LLU-C3-5K-NTN NTN, has an inner diameter of 25 mm, an outer diameter of 52 mm and a thickness of 15 mm.

Image

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

The Deep Groove Ball Bearing, known as 6205-LLU-C3-5K-NTN NTN, has an inner diameter of 25 mm, an outer diameter of 52 mm and a thickness of 15 mm.

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

The excellent low friction and high wear resistance performance of GGB metal-polymer bearings make them ideal for hundreds of applications in numerous and diverse industries. Depending upon application requirements, metal-polymer composite bearings can be produced in many shapes and sizes.

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

GGB’s TriboU is intended to provide the ​working engineer, who may or may not be a ​user of GGB’s surface engineered solutions, to ​understand and implement basic tribological ​concepts in the design, manufacture and ​use of industrial equipment.

GGB's diverse polymer coating solutions encompass some of the most state-of-the-art coating technologies available. Our TriboShield®  product line includes seven standard formulations that cover the full spectrum of mechanical, thermal and chemical capabilities offered by today's coating materials. They can also be applied to nearly any surface, regardless of shape or material, making their potential almost endless. And when it comes to working with and enhancing the performance of your existing bearing and polymer coatings solutions, our TriboMate product line is specifically designed to be paired up— all leading to enhanced performance.

They are commonly used in electric motors and in household appliances, car motors, office machinery, automation control, and garden and household tools. They have deep raceway grooves and their race dimensions are close to the dimensions of the balls that run inside.

GGB has been putting the world in motion for over 120 years with industry-leading tribological bearings, coatings and assemblies. From Polymer Coatings and Metal-Polymer bearings to Fiber Reinforced Composite bearings and self-aligning shaft bearing assemblies, our solutions are specifically designed to reduce friction and optimize performance and durability.

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.

Engineered as a solution to conquer misalignment reduction when high demands are placed on bearings, GGB's UNI, MINI and EXALIGN® self-aligning shaft bearing assemblies offer improved equipment performance under standard bearing assemblies by reducing stress and friction. Offering superior performance in a wide variety of applications, GGB's self-aligning assemblies are available in both standard and custom configurations.

The Deep Groove Ball Bearing, known as 6205-LLU-C3-5K-NTN NTN, has an inner diameter of 25 mm, an outer diameter of 52 mm and a thickness of 15 mm.

GGB seeks out collaborative, long-term relationships with each one of our customers. Our diverse expertise gives us a deep understanding of the challenges you face.  When you partner with us early, our GGB engineering team is able to review your assemblies and make sure both the bearing and surrounding components are optimized for performance and cost-effectiveness.

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

Tribology is the science of wear, friction and lubrication, and encompasses how interacting surfaces and other tribo-elements behave in relative motion in natural and artificial systems. This includes bearing design and lubrication.

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

Replacing deep groove ball bearings with plain bearings can offer a range of benefits, including lower cost, less maintenance, greatly reduce noise at low speeds and easier installation. Plain bearing can also have a higher load capacity, simplified assembly, increased longevity, reduced housing dimensions and assembly size and weight.

GGB tribological solutions move the industrial world one step closer to the future. Our products are used in tens of thousands of critical applications every day—around the planet. Our goal is to provide reliable, maintenance-free surface solutions for almost any application—no matter where those demands take our products.

Image

GGB's Fiber Reinforced Composite products typically consists of a filament-wound, fiberglass-impregnated, epoxy backing with a variety of low-friction wear-resistant bearing linings. These self-lubricating fiber reinforced composite bearings are particularly effective in applications where the relative motion is not sufficient to promote circulation of the oil or grease used with more conventional bearings. GGB Fiber Reinforced Composite bearings are available as bushes, plates, bearing segments and special forms, depending on the particular material type.

At GGB, we aren’t afraid to take risks for our customers. We are passionate about the work we do and believe that same passion contributes to the level of innovation that can enhance human potential. We take pride in working closely with customers in the early stage of a design to think broadly and boldly, and to expand beyond traditional surface engineered solutions. We offer reliable partnerships based on trust, compassion, determination, collaboration and respect.

They fall under two designs: there are single-row deep groove ball bearings with a single row ; and there are double-row bearings, which have two rows of bearing balls. They can also be made in different sizes and for different loads according to their application, from miniature ball bearings for light loads and small assemblies to large deep groove ball bearings and heavy load deep groove bearings.

GGB's Engineered Plastic Polymer bearings provide excellent wear resistance and low friction in both dry and lubricated operating conditions over a wide range of applications. Engineered plastic bearings are made from thermoplastic bearing material processed by injection moulding. This production method enables us to produce unlimited dimensions in accordance to our standard, and also parts with special designs and features.