Deep groove ball bearings 6314 C3 - AC Electric Motor - 6314 c3

The Deep Groove Ball Bearing, known as 6203-2RS-12-C3-PFI PFI, has an inner diameter of 12 mm, an outer diameter of 40 mm and a thickness of 12 mm.

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.

Requests to return goods must be made within 7 days from the date of the delivery. Returned goods must be unused and in good working order, fit for re-sale. Items on a Sale or Return basis agreed with the sales team, must be requested to return within 10 working days from the date of the delivery note.

Signet Industrial Distribution Ltd reserve the right to decline any returns, especially requests for the return of large quantity orders specifically ordered against your requirement. Goods are not to be returned without an authorised returns note complete with a Signet Industrial Distribution Ltd returns number. Any returned items must be accompanied by a Signet Industrial Distribution Ltd returns note, failure to include this makes the return void.

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

Any discrepancy with deliveries from Signet Industrial Distribution Ltd must be reported within 5 days from the receipt of goods. It is your responsibility to check the condition of your consignment whilst in the presence of the delivery driver and sign accordingly if the consignment is damaged. This also applies if the required delivery time is not met and the stated number of parcels are not present. Any claims cannot be accepted if the details are not made apparent on the consignment note

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

26-piece Kraftform Kompakt VDE set, 2x 817 VDE Kraftform blade-holding screwdrivers, 24 VDE blades (each 157 mm length) most of them with reduced blade diameter (iS), so that even low-lying screw and...

Not sure how we do things? Got a burning question? Chances are it's something we've been asked before. So we've put this handy section together for you where you can find answers to all of our most commonly asked questions.

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

High quality bits for Pozidriv screws in a practical Bit-Box. 1/4" hex, suitable for holders as per DIN ISO 1173-D 6.3. Features Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon...

Zyklop Hybrid ratchet set, 1/2" drive, metric. Including Zyklop Hybrid ratchet and Hybrid handle extension. Zyklop Hybrid ratchet with long overall length (leverage effect) and slim ratchet...

We are experts in product sourcing, whether it be machine specific, if you want products customised or even branded. We try to list all of our supply partners online but there are alternative brands and products that could also be available.

From 13 June 2014, the Consumer Contracts Regulations - which implement the European Consumer Rights Directive into UK law - apply to all purchases you make at a distance, for example online or over the phone. Details of the CCR can be found here - http://www.legislation.gov.uk/uksi/2013/3134/contents/made

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

The Deep Groove Ball Bearing, known as 6203-2RS-12-C3-PFI PFI, has an inner diameter of 12 mm, an outer diameter of 40 mm and a thickness of 12 mm.

The Deep Groove Ball Bearing, known as 6203-2RS-12-C3-PFI PFI, has an inner diameter of 12 mm, an outer diameter of 40 mm and a thickness of 12 mm.

Customer order errors can only be cancelled/amended within 1 hour of the order being placed. Goods ordered incorrectly can only be returned within 5 days of receipt of the good(s). Signet Industrial Distribution Ltd reserve the right to review returns or cancellation trends or history with any individual customer. We may choose to review that customers pricing structure or credit items to reflect any excessive level of returns or cancellations. Signet Industrial Distribution Ltd may also choose to forbid any further returns or cancellations from any one customer, for any reason.

High quality combination ratchet wrench set by Wera: everything that a wrench has to be able to do. And a whole lot more. Faster, better, stylish. Yes, a real Joker. The new generation of combination...

The Wera 9700 Rebel Roller Cabinet and Hand Tool Kit, Black, offers a comprehensive solution for professional tool storage and organization. With its exclusive roller cabinet design, featuring 7...

If you can't find what you are looking for on our online store then be sure to contact our expert sales team who will be happy to help!

43-piece Zyklop set in robust metal case: Zyklop ratchet with 1/4"drive and Zyklop ratchet with 1/4"drive. The 72 fine-pitched teeth enable a low return angle of only 5°. The ratchet head pivots...

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

Any request to cancel an order/back order must be made in writing via email to sales@signetid.co.uk. If accepted, a confirmation email will be sent accepting the request. Non-catalogue items cannot be cancelled, under any circumstances. Goods to be shipped directly from manufacturer must be cancelled within 1 hour of ordering. Cancellations will not be accepted if the goods have already been despatched by the manufacturer. Signet Industrial Distribution Ltd will not accept any order cancellation due to the manufacturer extending the expected or promised date.