Image

The Deep Groove Ball Bearing, known as 62207-2RS-SKF SKF, has an inner diameter of 35 mm, an outer diameter of 72 mm and a thickness of 23 mm.

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

The Deep Groove Ball Bearing, known as 62207-2RS-SKF SKF, has an inner diameter of 35 mm, an outer diameter of 72 mm and a thickness of 23 mm.

The 6209 is a 45 mm Ball Bearing that can be used in many rotary and factory automation applications. The 6209 Deep Groove Ball Bearings is an open style bearing. The 6209Z ball bearing is a single row raceway and single shielded. The 6209ZZ ball bearing has a single row raceway and it is shielded on each side. The B6209DDU, 6209DDU, 6209LLU, 6209-2NSE, 6209H2RS ball bearing are shielded by two rubber seals on each side. The 6209 45 mm Ball Bearing Inner Dimension 45mm X Outer Dimension 85mm X Width 19mm is an open style ball bearing designed for high rotational speeds and high dynamic loads.

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

The Deep Groove Ball Bearing, known as 62207-2RS-SKF SKF, has an inner diameter of 35 mm, an outer diameter of 72 mm and a thickness of 23 mm.

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

Image

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.