The Deep Groove Ball Bearing, known as 6203-ZZ-1-2 Generic, has an inner diameter of 12.7 mm, an outer diameter of 40 mm and a thickness of 12 mm.

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

Image

The Deep Groove Ball Bearing, known as 6203-ZZ-1-2 Generic, has an inner diameter of 12.7 mm, an outer diameter of 40 mm and a thickness of 12 mm.

Image

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

Product Code: 60062RSEDescription: 6006 2RS Economy Sealed Deep Groove Ball Bearing Number Pieces: 1Brand: NISSpecs: Inside Diameter: 30mm Outside Diameter: 55mm Width Dimension: 13mm Bearing Material: Steel Seal Material: Rubber Limiting Speed rpm: 8,000 Basic Load Rating (N)-Static: 8,300 Basic Load Rating (N)-Dynamic: 13,200Notes: The most common type of bearing. Single row of balls. Can take radial load & low axial load in 2 directions High speed Low noise/vibration Low friction torqueAlso known as:6006 LLU 6006 LLB6006 2NSE6006 2RS6006 DD6006 DDU6006 VV

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.

Image

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

The Deep Groove Ball Bearing, known as 6203-ZZ-1-2 Generic, has an inner diameter of 12.7 mm, an outer diameter of 40 mm and a thickness of 12 mm.

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".