The Deep Groove Ball Bearing, known as 6307-C3-SKF SKF, has an inner diameter of 35 mm, an outer diameter of 80 mm and a thickness of 21 mm.

SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.Features:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable for high and very high speeds• Steel/Ceramic ball material• Plain race type• Low friction• Available in many designs, variants and sizesWhy choose Deep Groove Ball Bearings?• For their versatility - channelling radial and axial loads they are widely used in many industries• Cost efficient - due to low friction torque the temperature remains low therefore reduces the energy cost of running in equipment such as the conveyor belt• Low maintenance - no additional lubrication after installationApplications:• Agricultural industry• Food processing• Machine Tools• Material handling • Medical/Pharmaceutical • Printing• Wind energy What is the inner ring diameter?A range between 6 mm to 40 mm What is internal/external design?• 2RS1 - Contact seal NBR on both sides 2RSH - Contact seal NBR on both sides• Z, 2Z - Shield on one or both sides• 2RSL - RSL low-friction contact seal on both sides of the bearing• 2RZ - RZ low-friction non-contact seal on both sides of the bearing• 2ZNR - Shield on both sides, snap ring groove in the outer ring, with snap ring• NR - Snap ring groove in the outer ring, with an appropriate snap ring• E - Reinforced ball set Cage Design• TN9 - Glass fibre reinforced polyamide 66 cages, rolling element centred• Stainless steel Lubrication• GJN - Grease with a polyurea thickener of consistency 2 to the NLGI scale for a temperature range -30°C to +150°C (normal fill grade) VT162 - Lubricated with Klueber Isoflex Topas NB52 grease• WT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +160 °C• LHT - Grease with a lithium thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –50°C to +140 °C• HT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +150 °C (normal fill grade) Accuracy/Clearance• C2 - Radial internal clearance smaller than normal C3 - Internal clearance greater than normal• C4 - Radial internal clearance greater than C3• C5 - Radial internal clearance greater than C4

Image

The Deep Groove Ball Bearing, known as 6307-C3-SKF SKF, has an inner diameter of 35 mm, an outer diameter of 80 mm and a thickness of 21 mm.

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

The Deep Groove Ball Bearing, known as 6307-C3-SKF SKF, has an inner diameter of 35 mm, an outer diameter of 80 mm and a thickness of 21 mm.

Image

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

Image

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.Features:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable for high and very high speeds• Steel/Ceramic ball material• Plain race type• Low friction• Available in many designs, variants and sizesWhy choose Deep Groove Ball Bearings?• For their versatility - channelling radial and axial loads they are widely used in many industries• Cost efficient - due to low friction torque the temperature remains low therefore reduces the energy cost of running in equipment such as the conveyor belt• Low maintenance - no additional lubrication after installationApplications:• Agricultural industry• Food processing• Machine Tools• Material handling • Medical/Pharmaceutical • Printing• Wind energy What is the inner ring diameter?A range between 6 mm to 40 mm What is internal/external design?• 2RS1 - Contact seal NBR on both sides 2RSH - Contact seal NBR on both sides• Z, 2Z - Shield on one or both sides• 2RSL - RSL low-friction contact seal on both sides of the bearing• 2RZ - RZ low-friction non-contact seal on both sides of the bearing• 2ZNR - Shield on both sides, snap ring groove in the outer ring, with snap ring• NR - Snap ring groove in the outer ring, with an appropriate snap ring• E - Reinforced ball set Cage Design• TN9 - Glass fibre reinforced polyamide 66 cages, rolling element centred• Stainless steel Lubrication• GJN - Grease with a polyurea thickener of consistency 2 to the NLGI scale for a temperature range -30°C to +150°C (normal fill grade) VT162 - Lubricated with Klueber Isoflex Topas NB52 grease• WT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +160 °C• LHT - Grease with a lithium thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –50°C to +140 °C• HT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +150 °C (normal fill grade) Accuracy/Clearance• C2 - Radial internal clearance smaller than normal C3 - Internal clearance greater than normal• C4 - Radial internal clearance greater than C3• C5 - Radial internal clearance greater than C4