This is a white general purpose grease that’s commonly used in household and gardening applications, such as door hinges and bearings.

Grease is a thick oily substance which is commonly used as a lubricant. It consists of a petroleum-derived or synthetic oil which is held in place by the gel structure of a thickening agent. It’s typically formed of these three components, which keep it in a semi-solid state:

This is the most commonly used type in the automotive industry. It’s typically made from calcium sulfonate and has high water resistance, however it isn’t designed to be used with high levels of heat.

This is its ability to withstand the effects of water with no change to its lubricant qualities, consistency and texture.

This range offers high mechanical stability and excellent anti-corrosion qualities, while another benefit is affordability.

It offers greater tolerance to extreme temperatures and environments which could be too hostile for mineral-based alternatives.

Machinery that isn’t easily accessible for frequent lubrication. High-quality greases can lubricate components for an extended period of time without frequent replenishing, and are used in applications which are sealed for life, for example electrical motors and gearboxes. If needed, it can be applied using a grease gun.

Are grease types interchangeableto lithium

Do not re-use the bearing assembly of your AUDI A4 B6 car. The wheel hub bearing replacement procedure is identical for both wheels on the same axle. Warning!

The measure of consistency is known as penetration, and its penetration depends on whether the consistency has been altered by stress, handling or working.

Tapered roller bearings are divided by their contact angle into normal-, medium-, and steep-angle types. In addition to double-row types, four-row tapered roller bearings are also available. Pressed cages are generally used, though large bearings may utilize pin-type cages.

Any machinery or equipment used in extreme conditions, such as high temperatures, pressures and shock loads. That’s because grease provides thicker film cushions, whereas oil films can be too thin for these applications.

2017226 — Home > Metric Bearings > 12mm inner diameter Bearings > 6202-2RS-12 3/4 Bearing 19.05x35x11 Sealed 19.05mm Bore Ball Bearings ...

The commonly used grease consistency classification is that established by the National Lubricating Grease Institute (NLG). It classifies greases in terms of their hardness or softness only, with no other property or performance level taken into account. The below image shows the system used to classify industrial greases.

Mineral oils are adequate for most electric motor bearing applications. However, synthetic base oils may be required for extreme temperature applications or ...

It has high levels of viscosity and works well under pressure and long-term lubrication. It’s ideal for metal-to-metal applications and has a higher melting point than calcium-based greases, but isn’t water resistant.

20241029 — a faulty wheel bearing will only make noise when you're driving. So, if you hear the sound when the vehicle is stopped, you can rule out the ...

NLGIgreasecompatibility chart

All three of these ingredients have different uses. The thickeners are soaps, which lubricate to reduce friction between moving surfaces. It’s there to hold oil in reserve until it’s needed to lubricate. When exposed to movement, vibration or temperature change, it’s triggered to release oil.

The consistency refers to its resistance to change through an applied force. Its consistency is determined by the type and amount of thickener it contains and the viscosity of the base oil used.

Social Media Policy      Trademarks     Terms & Conditions      Information Security Policy      Privacy Policy       Modern Slavery Statement      Sitemap

Boats and boat trailers also require the use of grease, however it needs to be suitable for high exposure to water. Fresh and salt water affects normal types of grease, so marine grease has been designed to withstand water.

Shellgreasecompatibility chart

It’s used to protect against water ingress and provides rust protection, as well as reducing friction experienced by machines.

The National Comprehensive Cancer Network® (NCCN®), a not-for-profit alliance of 33 leading cancer centers devoted to patient care, research, and education, ...

Lubrication controls friction and wear by introducing a friction-reducing film between moving surfaces, so a lubricant such as grease helps reduce friction in two ways. Firstly, it smooths and cushions the bumps between the two surfaces and, because it's a liquid, can change shape and flow.

Tapered roller bearings are designed so that the imagined conical apices formed by the raceways of the inner and outer rings and the rollers all converge at one point on the bearing axis. The trapezoidal tapered rollers used as the rolling elements are guided by a large rib on the inner ring.

Greasecompatibility chart Mobil

This can be either conventional or synthetic, and there’s a big difference in the results. Synthetic grease offers better protection against oxidation and the most resilient coverage in all types of weather.

A very thin lubricant won’t withstand heavy loads where there are slow moving parts, just as a really thick lubricant applied to a high-speed electric motor won’t be able to protect it. That’s why it’s important to know which type of product will offer the best results.

Friction is the resistance that one surface or object encounters when moving against another, which restricts them from sliding or rolling over one another. So two unlubricated surfaces, for example the teeth of two interlocking gears, are slowed down by friction.

SKFgreasecompatibility chart

TRBs can take radial loads and axial loads in one direction. When load is applied, the axial component generated inside the bearing generally requires the use of two opposed bearings (similar to angular contact ball bearings) or double-row bearings. Spacers are used to adjust the inner and outer rings in the axial direction to achieve the proper internal clearance. Since they are separable, the inner ring (cone) assemblies and outer rings (cups) can be mounted independently.

Nov 8, 2023 — ⁠⁠• 8x Steel Bar ⁠⁠• 3x Chromium Steel Bearings ⁠⁠• 3x Microchip. Upgrade Materials (From Tailoring Machine), • 2x Chromium Steel Bearings

It can also be used on worn components, as it maintains thicker films in clearances enlarged by wear and can even extend the life of worn parts which were previously oil lubricated. Thicker grease films can also offer noise insulation.

Depending on the application and task at hand, when choosing the right product there are some key considerations to look at before purchasing.

Thanks to it's water resistance, it can act as a sealant and is commonly used in the automotive industry for tasks such as chassis, wheel bearings and gears.

This silicone-based lubricant is a cloudy white paste that’s designed to be used with sensitive components, such as electronics.

Greasecompatibility Chart pdf

A deep groove ball bearing consists of an inner ring, outer ring, balls, a cage which has the task to keep a certain distance between the balls and possibly ...

Mixing greases can cause problems, with the different components reacting with each other. It can result in changes to the physical and chemical structure and impact its performance, so proper care should be taken to ensure compatibility between greases when changing from one to another.

Grease contains certain materials which enhance its qualities and help it work better in specific applications, and so these should be considered to ensure the right one is being used.

While they appear to have smooth surfaces from a distance, they're in fact rough at an atomic level – meaning one surface drags against the other, which wastes energy and wears out the materials.

Are grease types interchangeablepdf

The additives complement the lubricating ability of the base oil – enhancing its ability to protect against wear and rust. It has a high viscosity to begin with, but as stress or shear is applied its thickness levels decrease and it becomes oilier; practically the same thickness as its base ingredient. This process is called thixotropy and is characteristic of this lubricant – differentiating it from others such as petroleum jellies.

Power:Electric;Pressure:High Pressure;Voltage:110-120V/220V-240V 50Hz;color:red/blue /OEM;Feature:Eco-Friendly;Material:Plastic, plastic, ceramic, ...

Greasecompatibility chart

This sliding bearing life calculator helps you estimate the lifespan of your bearing in three easy steps: choose the type, enter dimensions, ...

Best bike grease shop for bearings. Green Cycle Grease Lubricant For Bike Gears Bearings Threads. Best Bike Greases in 2023 Top 8 Bike Greases Review.

The most common thickeners are soaps, typically lithium, which allow the different components to bond better and provide a more efficient product.

When using it, though, it’s important to know what type of grease is already in place, as it isn’t compatible with lithium-based products.

It has a high viscosity, so it’s a better choice for applications where liquid lubricants such as oil wouldn’t stay in place. This means grease and oil are not interchangeable.

Consistency of a grease may change as it’s worked or sheared – so its ability to maintain its consistency when worked it its shear stability. Greases which soften as they’re sheared are thixotropic, while ones which harden are rheopectic.

Please click on the links below to view greases produced by some of our most popular brands. As well as greases, we also stock a wide range of other useful oils and lubricants.