v-ringsealsize chart

V-ring type A with bevel back serves as a pressure less, axial rod seal with a very short mounting length, which is clamped on a shaft. The flexible sealing lip seals a counterface at a right angle to the shaft preventing dirt, dust and splash to enter the construction. Standard Materials Material: NBR FPM Color: black brown Hardness: 60° Shore A 60° Shore A Operational Range T: NBR: -40 till +100°C | FPM: -25 till +200°C V: ≤ 8m/s, from 8 to 12 m/s radial support is recommended.With speeds over 15 m/s the lip will come off the counter face. Additional Details

V-ring type S with bevel back serves as a pressureless, axial rod seal which is clamped on a shaft. The flexible sealing lip seals a counterface at a right angle to the shaft, preventing dirt, dust and splash to enter the construction. Standard Materials Material: NBR FPM Color: black brown Hardness: 60° Shore A 60° Shore A Operational Range T: NBR: -40 till +100°C | FPM: -25 till +200°C V: ≤ 8m/s, from 8 to 12 m/s radial support is recommended.With speeds over 15 m/s the lip will come off the counter face. Additional Details

V-ringsealSKF

ERIKS offers v-rings manufactured with four standard profiles. The S type v-rings are designed for shaft sizes up to 200 mm. The A type v-rings are designed for shaft sizes up to 2020 mm. The L type v-rings are designed for use when the sealing house is limited or as part of a labyrinth sealing application. The E type v-rings are designed with a reinforced profile for rigid applications where more axial tolerances are required.

V-ring type E with straight back serves as a pressureless axial rod seal with a very small mounting length, which is clamped on the shaft. The flexible sealing lip seals a counter face at a right angle to the shaft preventing dirt, dust and splash to enter the construction. Thetype E is designed for heavy use or is applied in situations where larger axial tolerances are required. This profile is delivered for shafts from Ø450 to Ø2010 mm. Standard Materials Material: NBR FPM Color: black brown Hardness: 60° Shore A   Operational Range T: NBR: -30 till +100°C | FPM: -15 till +200°C V: ≤ 8m/s, from 8 to 12 m/s radial support is recommended.With speeds over 15 m/s the lip will come off the counter face. Additional Details

v-ring seals catalogue

V-ring type L with straight back serves as a pressureless axial rod seal with a very small mounting length, which is clamped on the shaft. The flexible sealing lip seals a counterface at a right angle to the shaft preventing dirt, dust and splash to enter the construction. Standard Materials Material: NBR Color: black Hardness: 60° Shore A Operational Range T: NBR: -40 till +100°C V: ≤ 8m/s, from 8 to 12 m/s radial support is recommended.With speeds over 15 m/s the lip will come off the counter face. Additional Details

If you have LEGO news, new images or something else to tell us about, send us a message. If you have a lot to tell us, use this contact form.

A v-ring seal is a one-piece seal which is mounted on a shaft and seals axially against a counterface and normally rotates with the shaft. The construction of a v-ring seal is divided into three parts: a. the body b. the lip c. the hinge