Lubricating oil is dripped from the oiling device and the effect of the rotating part causes the lubricating oil to mist and fill the housing. This has a cooling effect. This method can be applied at relatively high speeds and mid-level loads.

This is a method in which gears, etc. are attached to the shaft, the lubricating oil is splashed, and it is made into droplets for oil supply. This method can be applied at relatively high speeds.

As the primary methods of grease lubrication, allow us now to look at grease-packed bearings (wherein grease is filled inside the bearing in advance ) and the feeding method.

Types of lubrication in bearing

Because grease is semi-solid, it tends not to leak out and can be easily affixed to the inside of the bearing. Since this makes it convenient as a sealing device, grease lubrication is widely applied for bearings.

Double Sealed Ball Bearing, R22-2RS This 1-3/8″ bore diameter, 2-1/2″ outer diameter ball bearing is in stock and available for purchase online. 2RS– Two rubber seals Radial ball bearings are able to accommodate low to heavy radial loads and low to moderate thrust loads” either direction. For more”formation about this or other ball bearings, contact MDS using the “Have a question about this product?” link below.

Double Sealed Ball Bearing, R22-2RS This 1-3/8″ bore diameter, 2-1/2″ outer diameter ball bearing is in stock and available for purchase online. 2RS– Two rubber seals Radial ball bearings are able to accommodate low to heavy radial loads and low to moderate thrust loads” either direction. For more”formation about this or other ball bearings, contact MDS using the “Have a question about this product?” link below.

On the other hand, lubricating oil with high kinematic viscosity is thick, the lubricating oil film being strong. It is used in bearings to which a heavy load is applied. However, if the kinematic viscosity is too high, the viscosity resistance of the lubricating oil will cause a large amount of heat to be generated.

Generally, mineral oil--which is a refined crude oil and suitable for lubrication--is used as lubricating oil. However, mineral oil has the disadvantages that it oxidizes at high temperatures and its lubricating function deteriorates, and that at low temperatures its viscosity increases and the force required to stir the lubricating oil (the "stirring resistance") increases. For this reason, we use synthetic oil that has excellent lubricating function in high temperature or low temperature (see Table 6). Additives are added to the lubricating oil to improve certain characteristics (preventing oxidation, rust, foam, and so on).

High Speed Bearing Oil

Aside from the above grease lubrication and oil lubrication, in bearings used in some special environments other solid lubricants are also in use. For information on these, see the following.

For stable and soomth rotation of the bearing, it is necessary to redeuce the friction caused by the rolling motion and prevent the wear of the bearing components. "Lubrication" plays a major role in this process.

Bearings aim for stable and smooth rotation, and to do that the friction with rolling motion needs to be reduced and the abrasion of the various components needs to be prevented. "Lubrication" plays a major role in this process. It is important to choose the appropriate lubricant and lubricating method in order to allow the bearing to rotate stably over a long period of time.

When a bearing rotates, the convex regions of the bearing rings and the rolling elements come in contact with each other. This contact between the convex regions leads to friction and wear, inhibiting the smooth rotation of the bearing. (See Figure 1.)

Bearing lubrication chart

Greases of different brands should not be mixed.The grease's characteristics may change and cause damage to the bearing.

Best lubricant forbearings

The lubricating oil used for the base oil is explained in "4. Oil lubrication" further down this column.The thickener disperses throughout the base oil (lubricating oil) and makes it semi-solid, preventing the base oil from spilling out.The additives complement the performance needed for the purpose of use.With grease lubrication, when the bearing rotates the base oil gradually oozes out and lubricates the bearing.

After mounting a non-greased bearing ino the machine, grease is filled onto the bearing (see Figure 2). Grease supplied through the grease nipple is filled into the grease sector inside the housing, flowing into the inside of the bearing. Used grease is pumped out of the bearing and ejected out of the housing by the centrifugal force of the rotary disc attached to the grease valve.

The kinematic viscosity of lubricating oil changes depending on the temperature (see Figure 6). For this reason, consider the temperature during operation when you select the lubricating oil.

Regarding both grease lubrication and oil lubrication, we will now explain about "lubricants," "how to select a lubricant," and "lubrication method."

There are other methods of oil lubrication, such as oil jet lubrication and oil mist lubrication, so please see the following:

In order to prevent this friction and wear, oil or some other substance is applied between the contact regions. This is called "lubrication." With the appropriate lubrication, an oil film makes it so that the rolling elements and bearing rings do not come in direct contact. This results in less friction and a massive decrease in wear. (See Figure 2.)

On the other hand, oil lubrication is more effective as a lubricant than grease lubrication, and so is used in situations where such factors as high-speed rotation, a large cooling effect, or dirt filtering are required (see Table 3).

In Part 6, we will explain about bearing lubrication as a measure for whether the bearing type you chose was appropriate.

What's the Structure of the Bearing? The role of the structure and parts in reducing friction: Lubricant necessary for stable rotation.

This is a lubrication method in which the lubricating oil is inserted inside the bearing, then cooled, and then circulated again. It is most commonly applied in high-speed rotation or high-temperature conditions.

This is a method of operating the machine by immersing the bearing in lubricating oil. It is suitable for low- to medium-speed rotation.

The primary purpose of lubrication is to reduce friction and wear, but there are also other reasons for lubrication (see Table 2).

Bearing lubrication oil

In order to select the most appropriate lubricating method from among the many methods of oil lubrication, consider the operating condition, usage criteria, and cost.Allow us to explain about the four most common methods of oil lubrication.

What is the best lubricant for ballbearings

Select the lubricating oil with the appropriate viscosity for the operating temperature of the bearing. First we select the lubricating oil with the proper kinematic viscosity for the type of bearing (see Table 7).

Grease-packed bearings are bearings that are sealed by the bearing manufacturer using a shield or seal after inserting the necessary grease into the inside of the bearing (see Figure 3).

The main components of grease are base oil (lubricating oil), thickeners, and additives, and the components and amounts of these are adjusted and blended according to the purpose of use (see Table 4).

Below is an explanation of the lubricating methods used to allow the bearing to rotate stably over a long period of time.

Lubricating oil with low kinematic viscosity is smooth, the lubricating oil having little resistance. It is used in bearings that rotate at high speed. However, if the kinematic viscosity is too low, there will be insufficient formation of the lubricating oil film, and the lubricating effectiveness will be decreased.

The surfaces of bearing rolling elements and rings (inner ring and outer ring) are finished extremely smooth. But however smooth they are their surfaces still have unevenness.

The major types of bearing lubrication are: grease lubrication, which uses semi-solid (i.e., like cream) grease; and oil lubrication, which uses lubricating oil.