Wheel bearing pricesnear me

Hub bearings are readily available online and at auto parts stores. Opting for a less expensive option should still work well. A competent mechanic can usually install them for much less than a dealer would charge. The main challenge is that they can be difficult to remove if they’ve rusted into the hub.

It seems that both procedures are charged at a flat rate of 4 hours. Wheel bearings cost about $100 each, with labor around $100 per hour, so you are looking at roughly $600 in total. If you can remove the steering knuckles yourself and take them to a shop, and use aftermarket or discounted factory bearings, you might reduce the cost to just over $300, assuming you don’t need new hubs. If hubs are required (and Camry hubs often slip and wear out), expect the total estimate to increase by around $200.

Wheel bearingreplacement cost

I went to a local mechanic, who charged $100 for each bearing and $100 for each installation, totaling $400. Additionally, the alignment costs between $60 and $100, so expect to pay around $500. This is a good opportunity to replace any other worn parts, such as shocks or outer tie rods, since you’ll need an alignment.

It was for my front driver side wheel bearing assembly and the axle on the same side. I’m not sure why others quote 4 hours for this job. Sent from my iPhone using Tapatalk

Wheel Bearingcost AutoZone

As an already registered user simply enter your userame and password in the login page in the appropriate fields. After logging in you will see your user specific settings and prices as well as having other functions at your disposal.If you have forgotten your password please use link "Forgotten Password?" on the login page.

I use Timken bearings from RockAuto, which are often reboxed OEM NSK or Koyo, costing about $35-40 each. Press work is roughly $40 per side, plus a four-wheel alignment afterward. However, you’ll need to be mechanically skilled and have the right tools to do this yourself.

Labor for both sides is listed as 2.2 units under manufacturer warranty and 2.8 units for standard service. A hub bearing for one side costs around $154 for an OEM part.