Polyurethanesheeting

ACCUSHIM, INC. has one of the largest inventories of pre-cut shims in the Nation. We manufacture and distribute the ACCUSHIM line of pre-cut slotted stainless steel shims used for shaft alignment in seven sizes and fifteen thicknesses as well as custom shims to suit your needs.

Belt Hog Benefits This little 1.6-pound tool is a heavyweight when it comes to making things simple. You've heard of living high on the hog? Welcome to working high on the Hog. Benefits of good alignment: Reduces downtime Extends belt and pulley life Reduces vibration and belt noise Minimizes unscheduled stops Advantages of the Belt Hog: Accurate, measures from the pulley grooves where the belts operate Easy to use, no training required Fast, one person operation No need to remove the belts Measures vertical angle, horizontal angle and offset simultaneously Measures distances from 6" to 20 feet Measures pulley diameters 3" and larger

Polyurethanegasket maker

Product Features Belt Hog Benefits This little 1.6-pound tool is a heavyweight when it comes to making things simple. You've heard of living high on the hog? Welcome to working high on the Hog. Benefits of good alignment: Reduces downtime Extends belt and pulley life Reduces vibration and belt noise Minimizes unscheduled stops Advantages of the Belt Hog: Accurate, measures from the pulley grooves where the belts operate Easy to use, no training required Fast, one person operation No need to remove the belts Measures vertical angle, horizontal angle and offset simultaneously Measures distances from 6" to 20 feet Measures pulley diameters 3" and larger   Belt Hog Specifications Housing Material: Precision molded PA Dimensions: 2.68 x 3.62 x 2.65 in (h x w x d) Weight: approximately 1.66 lbs Battery type: (2) AA batteries Operating time: 20 hours continuous operation Measuring distance: 6" to 20 feet Measuring accuracy: Better than 0.5mm or 0.2 degrees Pulley diameter range: 3" and larger Pulley belt groove with: A, B, C, D, and E sizes (0.2" - 1.6") Classification: Class 2 LASER Output power: <1mW LASER wavelength: 630 - 675 nm Belt Hog Alignment Procedure The Belt Hog uses two LASER transmitter for projecting of LASER lines on the opposite LASER unit. By adjusting the pulleys so that the laserline coincides with the reference line on the opposite LASER unit, the pulleys are aligned. Mounting of the Belt Hog units Each unit is mounted on the pulley as shown in the diagram below. Note: The magnets, which holds the unit to the pulley, are very strong. Do not pinch your fingers! Position both units with the spring action probes resting in the same groove on both pulleys and the units are facing each other as shown below. When the units are mounted, turn on the LASERS. Each LASER generates a line on the opposite unit. When correctly aligned the lines coincide with the reference marks on the labels on both units. If the belt transmission is mis-aligned, start by correcting the angular error. It is important that the pulleys are mounted correctly on the shafts and that the shafts are straight before starting the alignment process. Wobbling or warped pulleys affects the alignment quality severely. Safety The Belt Hog uses LASER diodes with a power output of less than 1.0 mW. The LASER classification is Class 2, which is considered safe for its intended use with only minor precautions required. These are: Never stare directly into the LASER light source. Never direct the LASER into anyone else's eyes. Your system complies with the requirements in: SS-EN-60825-1-1994 British Standards BS 4803 Parts 1 to 3 Deutche Industrie Norm DIN JEC 76 (CO) 6 USA FDA Standard 21 CFR, Ch 1, Part 1040.10 and 1040.11 Packaged Dimensions: 16"L x 10"W x 8"H

Description Supplement: undefined Short description: Long description: Squealing, shaking, out-of-line belts and pulleys are more than a nuisance. They're the cause of expensive downtime, shortened equipment life, and inefficient operation. If you ever have those problems, it's time to holler for the Belt Hog. Accushim's Belt Hog makes it simple to align belts and pulleys. You won't have to remove the belts to make quick, accurate adjustments over distances of 6" to 20 feet. One person can accomplish an alignment with no training other than reading the short instruction manual. Belt Hog mounts in the grooves-right where the power is transferred. Groove mounting makes it simpler to keep everything parallel. Belt guards can often be left on, and pulleys on shafts set in different directions can be aligned just as easily. Bright dual LASER beams let you know when you've got things straight.

Poly Fluoro has the capacity to both machine and injection mould polyurethane material. Seal sizes can vary from as little as 10mm all the way up to 400mm+. Similarly, injection moulded sealing solutions - such as sealing strips, guides, and channels can be developed in-house, keeping the end application in mind such that a solution is offered that is tailored to the client's exact use.

Polyurethanegasket material

Belt Hog Specifications Housing Material: Precision molded PA Dimensions: 2.68 x 3.62 x 2.65 in (h x w x d) Weight: approximately 1.66 lbs Battery type: (2) AA batteries Operating time: 20 hours continuous operation Measuring distance: 6" to 20 feet Measuring accuracy: Better than 0.5mm or 0.2 degrees Pulley diameter range: 3" and larger Pulley belt groove with: A, B, C, D, and E sizes (0.2" - 1.6") Classification: Class 2 LASER Output power: <1mW LASER wavelength: 630 - 675 nm Belt Hog Alignment Procedure The Belt Hog uses two LASER transmitter for projecting of LASER lines on the opposite LASER unit. By adjusting the pulleys so that the laserline coincides with the reference line on the opposite LASER unit, the pulleys are aligned. Mounting of the Belt Hog units Each unit is mounted on the pulley as shown in the diagram below. Note: The magnets, which holds the unit to the pulley, are very strong. Do not pinch your fingers! Position both units with the spring action probes resting in the same groove on both pulleys and the units are facing each other as shown below. When the units are mounted, turn on the LASERS. Each LASER generates a line on the opposite unit. When correctly aligned the lines coincide with the reference marks on the labels on both units. If the belt transmission is mis-aligned, start by correcting the angular error. It is important that the pulleys are mounted correctly on the shafts and that the shafts are straight before starting the alignment process. Wobbling or warped pulleys affects the alignment quality severely. Safety The Belt Hog uses LASER diodes with a power output of less than 1.0 mW. The LASER classification is Class 2, which is considered safe for its intended use with only minor precautions required. These are: Never stare directly into the LASER light source. Never direct the LASER into anyone else's eyes. Your system complies with the requirements in: SS-EN-60825-1-1994 British Standards BS 4803 Parts 1 to 3 Deutche Industrie Norm DIN JEC 76 (CO) 6 USA FDA Standard 21 CFR, Ch 1, Part 1040.10 and 1040.11 Packaged Dimensions: 16"L x 10"W x 8"H

Polyurathene or PU is a soft plastic with slight elasticity. This property makes PU a highly sought after material for hydraulic seals and pneumatic seals. Although the material will not be able to withstand temperatures in excess of 150 Deg C, for applications within this temperature, polyurethane offers superior sealability at a very reasonable cost.