6203Z URB available at ABF.store ? Same-day shipment ? 10.000.000 bearings and electric motors ? Worldwide delivery ? Customer Service in 8 languages.

Thanks everyone! I am thinking about having our hay guy do it. We’ll pay him to cut, rake and bale. I’m thinking that it will be nice to have extra hay and I’m hoping that it may cut some of our hay expenses, even if it’s just by a little bit.

Doing it yourself? Be prepared to shell out about $10k for old equipment that you’ll have to nurse along, or more for stuff that is going to run fairly flawlessly…at least those are the prices in my area. Plus the tractor to pull everything.

We’re very lucky that our neighbor/farmer bales our 20 acres for us. He charges us $1.30 a bale, we can’t beat that!! He’s been great to us, he’s been there to teach us along the way, such as getting the soil tested, when to apply the lime, fertilizer & reseed, etc. And he staggers cutting our hay, meaning he doesn’t drop all our hay at once, we lost our first cutting the other year but it was only one of the fields, so we still had the other field to bale. He’ll bring the hay wagons right up to our hay shed then it’s up to us to unload & stack, we usually pay kids per wagon load to help us, plus dinner out, but now that we have a hay elevator life is that much easier & we don’t need as much help. Yes, probably moisture content is the hardest thing we deal with, as we have lots of clover in our mix, but we like the clover & so do our horses. The farmer that bales our hay is a full time farmer so we do understand that his real job comes first & whenever we see him bringing in his own hay or straw we’re sure to drop what we’re doing & help unload & stack for him, as we know how good he has been to us.

We used to bale our own hay. As 2nd and 3rd generation farmers, we had both the equipment and knowledge. But, the upkeep on the old equipment became cost prohibitive, and the disruption to every one’s daily life was too much of an inconvenience. As if the variable of the weather didn’t already affect the hay making process enough, try scheduling your time off work around it! And then there were the bad backs and aches and pains.

We bale our own hay - put up about 3,500 square bales and 35 - 50 round bales. It’s a lot of work but I don’t mind so much - there’s something rewarding about the outside work to feed our beloved horses. however, there’s stress and $$ involved as well - especially with the gas prices going through the roof.

We have about 12 acres of brome that we have been lucky enough to find someone to cut and bale for us. We end up with anywhere from 800-1000 square bales of beautiful hay IF we get it done at the right time and between rains. We have a tractor so do our own fertilizing and basically walk & weed it by hand before baling. Then we turn our horses out on it to graze for the rest of the year. The biggest problem we have is finding HELP ! Kids nowadays don’t want to do hard labor, so we struggle to get help or do most of it ourselves and thankfully the current hay guy has great equipment including a stacker - that has saved alot of time as he can put the bales on the wagon and we only have to handle it once to get it in the barn. We keep all of ours and pay to have it done. We’ve deabted about switched to having it round baled just save our backs. . . Love the squares but it is so much more work.

We are lucky here in OK that we can pretty much cut on day, rake the next and bale the next since it is so dry. But we also will only get 1 or 2 cuttings.

Nothing like the smell of just cut/baled hay Cutting your own hay will make you neurotic about the weather, please rain, please don’t rain.

General Lubrication Products Lincoln - Free download as PDF ... For more information on FlowMaster family of pumps, please see the Centro-Matic® catalog, form # ...

Fasteners Washers Flat Washers. 3/8" x 1.000" OD 316 Stainless Steel Large OD Flat Washer ... General Purpose Flat Washer. Fastenal Sku: 78018. Online Price ...

I let the weather, the soil, the price of fuel, the rain and the tractor maintenance be my hay guy’s problem. He’s a patient, so keeping HIM going is MY problem! :lol:

I love my hay dude!! He bales my 10 acres of coastal bermuda. I pay for the fertilizer and weed spraying. He cuts, bales and stacks. We either split it or if it’s really nice and I have the room, I buy his half. This gets me beautiful hay and my ag discount. I usually sell a few hundred bales to cover my costs. And I don’t have to mow my pastures

Also, and I don’t even know why it still needs to be said, but it does because no one ever seems to have one when they come on here to whine, but GET A CONTRACT. Outline what the specific deal is (splitting hay/paying per acre/whatever) and what exactly happens if the deal doesn’t work out.

A skill I’d love to learn someday, but right now I don’t have time and am plenty well supplied with things to stress out over! :lol:

We have done both. Hired someone to mow, rake and bale as we did not want to invest in all the equipment. We had to load and unload wagons, trying to coordinate 3 people’s schedules to cooperate with the weather did not work well so we had local farmer bale for us. This was wonderful until his boys graduated from high school and moved out. We now rent our former hay ground to a neighbor and buy our hay. Rent $ covers a significant amount of the cost. I used big square bales this past winter and they were delivered and stacked by my hay guy. They worked out really well. Mary

But I have a fulltime job and ride as my hobby and I do my own hay. What everyone else has said is pretty true. My parents did it, so I learned all the ins and out growing up. Now I do it myself - yes it is a LOT of work - my fields produce 1200-1800 bales for first crop - I don’t need any more so I don’t do 2nd.

Since we have 23 acres and only 1 horse these days, we have our very nice brome mix pastures baled every year. We couldn’t possibly use as much hay as we produce so we made a deal with a rancher neighbor to bale our place on shares.

We grow and bale our own hay, about 100 acres, 3 crops per year. We have “middle aged” equipment and are able to do most of our own repairs. However, I took a bearing out of our swing tongue mower last fall and that turned into a nightmare. And almost $1400 in repairs :eek:.

Having a farmer do it? Be aware that unless he’s literally right next door to you (and sometimes not even then) most farmers won’t bother with anything under about five acres or so. Just not worth their time if they’re splitting the hay with you, in terms of how much time and effort goes into haying a field. Also be aware that if you do find a nice farmer to do your small piece…it’s going to come below his own fields in his list of priorities. There is no way around it.

Haying is a lot of work. However, I love the farming end of things. Few things equal the “communing with nature” that farmings brings you. Call me crazy but I don’t think I’d have it any other way :).

And be careful if you do it yourself. The first year our BO’s husband did it he got the moisture wrong - nearly set the whole place afire when more than a few bales got hot - spontaneous combustion on a large scale is scary, especially when it’s a barn. He’s gotten much better at it and makes lovely hay now.

[QUOTE=drewsbadboy;5574963] Does anyone know anything about either baling your own hay or having a farmer do it for you?[/QUOTE]

our first year here a neighboring farmer generously let us borrow his equipment when he was not using it. (We had our tractor…borrowed his cutter/flipper/baler). Getting the moisture right is a learned art. We did not burn any barns down! Wit jut 2 of us doing it with the rains a coming…we about died trying to get 1200 bales in first cutting. The knotter it tricky to get the tension right too or you break the twine all the time. The next year had an Amish neighbr help us in exchange for part of the hay crop. Waaay better for us!!

Feb 6, 2024 — My short explanation is that a ball bearing allows us to trade a coefficient of kinetic friction for a coefficient of rolling resistance, and ...

We also built mini sheds for the round bales and made the roof out of tarp - this has served 2 great purposes - keeps the hay dry and de-sensitizes horses to noise and moving tarps Those plastic hay-houses are REALLY cool but uber expensive.

20211022 — This happens to my tungsten balls all the time anyone know how to fix? Deidara22 oct 2021. 2.

we have done both. And do both now. It was a pain in the butt when we had others do it. On their time table, etc. We finally broke down and bought our own equipment. Let me re-phrase that: my hubby bought his own equipment. And it is a learning curve as to which equipment to use. All have pros and cons. And then there is the maintance of the equipment. He count on a good day or 2 getting everything up and running at the start of haying, and then a couple of days on the down end to get it all cleaned up and such to put it away. And of course we have to have 3 tractors. One for the mower, a smaller one for the rake and a bigger one with a cab for the baler. And of course the repairs and such while baling since invariably something breaks (at least once).

With hay going for $10 a bale in this area, I wish I could bale my own. One of my friends in ME did it, and while it was worth it, she was totally at the mercy of the weather and equipment that broke down all the time. I liked buying it out of the field. It was a good savings, a good work out and you could see where your hay was coming from. Plus it was $2.00 a bale. I miss those days.

We take care of weed control, he takes care of fertilizing, mowing and baling. We get a specific number of square bales out of it and he bales the rest in rounds for his cattle. This arrangement costs us nothing and it makes our neighbor very happy!

I quit doing it in 1982. We don’t have the right micro-climate, being right downwind from a large body of water, in a normally high humidity area in hot weather. It was nearly impossible to ever catch the right conditions long enough to dry it properly. The worrying and watching conditions here was just not worth the effort.

As a member of the wwPDB, the RCSB PDB curates and annotates PDB data according to agreed upon standards. The RCSB PDB also provides a variety of tools and ...

The best way to get into it would be to sort of apprentice with someone who knows how. A lot of it is feel/instinct. I can pick up a handful of stuff and know whether it’s ready to bale, or if it’s still ‘grass’. How fast you can push the machines is another learning curve - sure you can bale in 4th gear, but you are far more likely to break something.

One of the great things about growing and baling our own hay is that we KNOW what our horses are eating. We take 1st cutting in June - mostly Timothy grass blend and 2nd cutting is 1/2 Alfalfa and grass blend. We don’t typically make a 3rd cutting - but have done it when the weather didn’t cooperate and allow us a 2nd cutting.

High-Pressure Iron and Steel Threaded Pipe Fittings, 1" NPT tee's and 90's ; Thread Standard. NPT ; Est. delivery. Sat, Nov 16 - Thu, Nov 21. From Riverside, ...

Replacement bearings for the WTP Supreme/Arrow Rear hub.

Dimension chamfers by angle and a linear dimension or by two linear dimensions. When specifying an angle and linear dimension, the linear dimension is the ...

Shop all Wheel Bearings and Wheel Bearings, Hubs & Seals products available now on NAPAonline and for pickup at your local NAPA Auto Parts store!

You know, once upon a time tractors were not used to bring in the hay, horses were. Amish still do it that way. You could buy a horse mower and a rake. It isn’t very hard where I live to find someone to bale a smaller field if you can take round or giant square bales. Or you can bring the hay in loose if you have a mow to store it in; that was once done as well. It is, be advised, a whale of a lot of physical work.

Not that finding a reliable hay supplier is much cheaper or easier!!! AND, sometimes you don’t know until you open a bale that it wasn’t properly baled and not you have $500 worth of mulch hay :sadsmile:

He does cut for other people occassionally but it is a huge PITA. 3 pieces of equipment to haul so that means 3 trips (both ways) moving the equipment. And not knowing what is the field regarding trash, stumps, etc that can damage equipment…And now with diesel at $>4/gallon it gets really pricey to cut for someone else.