In 19223 train route maximum halt time for this train is 40:00 minutes at PATHANKOT(PTK). Train 19223 arrives at PATHANKOT at 15:00 and departs at 15:40. So if you want to get down from the train and buy anything from the station or for little fresh air. It's safe to get down at this station.

Bearing housings are usually made of grey cast iron.[1] However, various grades of metals can be used to manufacture the same, including ductile iron, steel, stainless steel, and various types of thermoplastics and polyethylene-based plastics.

Pillow blocks differ from "plummer blocks" which are bearing housings supplied without any bearings and are usually meant for higher load ratings and a separately installed bearing.[1] Plummer block bearings are designed for more corrosive environments.[1] The fundamental application of both types is the same, which is to mount a bearing safely enabling its outer ring to be stationary while allowing rotation of the inner ring. The housing is bolted to a foundation through the holes in the base.

The bearing element may be manufactured from 52100 chromium steel alloy (the most common), stainless steel, plastic, or bushing materials such as SAE660 cast bronze, SAE841 oil impregnated sintered bronze, or synthetic materials.

Train starts from Ahmedabad (ADI) , Ahmedabad to Kanpur Central (CNB) , Kanpur. Total duration is 21 Hours and 45 Minutes.

Linear bearing

Train 19223 GNC JAT EXP runs from Ahmedabad Junction(ADI) to Jammu Tawi(JAT) on Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday. Train departs from Ahmedabad Junction(ADI) at 11:20 and reaches Jammu Tawi(JAT) at 18:40. It takes 2 days to reach train 19223 from Ahmedabad Junction(ADI) to Jammu Tawi(JAT) .

Train starts from Ahmedabad (ADI) , Ahmedabad to Pune Junction (PUNE) , Pune. Total duration is 46 Hours and 20 Minutes.

Train starts from Ahmedabad (ADI) , Ahmedabad to Kanpur Central (CNB) , Kanpur. Total duration is 21 Hours and 45 Minutes.

Various sealing arrangements may be provided to prevent dust and other contaminants from entering the housing. Thus, the housing provides a clean environment for the environmentally sensitive bearing to rotate free from contaminants while retaining lubrication, either oil or grease, increasing its performance and duty cycle.

A pillow block bearing (or plummer block) is a mounting used to support a rotating shaft with the use of bearings and various accessories. The assembly consists of a mounting block which houses a bearing.[1] The block is mounted to a foundation, and a shaft is inserted, allowing the inner part of the bearing/shaft to rotate.[1] The inside of the bearing is typically 0.025 millimetres (0.001 in) larger diameter than the shaft to ensure a tight fit.[2] Set screws, locking collars, or set collars are commonly used to secure the shaft.[2] Housing material for a pillow block is typically made of cast iron[1] or cast steel.

KP000 Bearing

Maximum halt time of 19223 GNC JAT EXP train is 40:00 minutes at PATHANKOT(PTK)

Bearing housings may be either split type or solid type.[1] Split type housings are usually two-piece housings where the cap and base may be detached,[1] while solid are single-piece housings.[1]

A pillow block usually refers to a housing with an included anti-friction bearing, wherein the mounted shaft is in a parallel plane to the mounting surface and perpendicular to the center line of the mounting holes, as contrasted with various types of flange blocks or flange units.

Train starts from Ahmedabad (ADI) , Ahmedabad to Nagpur Junction (NGP) , Nagpur. Total duration is 29 Hours and 10 Minutes.

Train starts from Ahmedabad (ADI) , Ahmedabad to Gwalior Junction (GWL) , Gwalior. Total duration is 12 Hours and 5 Minutes.

Pillow blockBearing

Train starts from Ahmedabad (ADI) , Ahmedabad to Kanpur Central (CNB) , Kanpur. Total duration is 21 Hours and 45 Minutes.

Train starts from Ahmedabad (ADI) , Ahmedabad to Shahu Maharaj Terminus (KOP) , Kolhapur. Total duration is 33 Hours and 5 Minutes.

A pillow block may contain a bearing with one of several types of rolling elements, including ball, cylindrical roller, spherical roller, tapered roller, or metallic or synthetic bushing.[1] The type of rolling element defines the type of pillow block.

GNC JAT EXP 19223 train passes through 48 major stations in 2 days to reach from Ahmedabad Junction to Jammu Tawi . It takes total of 31:20 hours journey to reach Jammu Tawi .

Train starts from Ahmedabad (ADI) , Ahmedabad to Mumbai Central (MMCT) , Mumbai. Total duration is 7 Hours and 40 Minutes.