Comshort name

Comdomain

.Com actual use

NEWORLD cylindrical roller thrust bearings are designed to accommodate heavy axial loads and impact loads. They must not be subjected to any radial load. The bearings are very stiff and require little axial space. (fig. 1)

NEWORLD recommends using both of these washers in high-speed applications where accurate centring of the bearing washers is required.

Comfull name

Intermediate washers must have the same surface finish and hardness as bearing washers. NEWORLD does not supply intermediate washers, but provides material specifications and dimensional data on request.

Cylindrical roller and cage thrust assemblies are generally centred radially by the shaft to reduce the circumferential speed at which the cage slides against the guiding surface. This is particularly important for higher-speed applications. The guiding surface should be ground.

Copyright © NEW WORLD INDUSTRY (SHANGHAI) CO.,LIMITED All Rights Reserved. | Sitemap | Sitemap

As standard, cylindrical roller thrust bearings are available as single direction bearings and can accommodate axial loads in one direction only.