The O-ring Seal with the reference OR-34X6-NBR90 has an inner diameter of 34 mm and a thickness of 6 mm. It is made of NBR.

These are the different types of rubber. Each material will be more or less suitable for a use. Refer to the following information: FOR OILS NBR = Nitrile = Butadiene rubber - Acrylonitrile        from -30°C to +120°C FPM = Viton = Fluorinated Rubber        from -20°C to +200°C MVQ = Silicone rubber        from -50°C to +210°C FOR HYDROCARBONS NBR = Nitrile = Butadiene rubber - Acrylonitrile        from -30°C to +120°C FPM = Viton = Fluorinated Rubber        from -20°C to +200°C FOR BRAKE FLUID EPDM = Ethylene Rubber - Propylene - Diene        from -40°C to +150°C FOR WATER EPDM = Ethylene Rubber - Propylene - Diene        from -40°C to +150°C  FOR MORE DETAILS ON THE MATERIALS, THEIR STRENGTHS AND LIMITS OF USE, REFER TO THE COMPLETE DESCRIPTION ON THE SEALED SEARCH PAGE

Example: OR-40X3-NBR90 Where OR = product type (O-ring or O-ring seal) 40X3 = inside diameter X thickness NBR = matter 90 = shore hardness Shore hardness is a material hardness scale, usually between 70 and 90 for O-rings. The higher the number, the harder the material.

The O-ring Seal with the reference OR-34X6-NBR90 has an inner diameter of 34 mm and a thickness of 6 mm. It is made of NBR.

An O-ring should not, in general, be too stretched. It is therefore preferable to take a dimension as close as possible to the groove diameter, if applicable.

0,81 € excl. VAT / piece

This is the indication of shore hardness. Shore hardness is a material hardness scale, usually between 70 and 90 for O-rings. The higher the number, the harder the material.

The O-ring Seal with the reference OR-34X6-NBR90 has an inner diameter of 34 mm and a thickness of 6 mm. It is made of NBR.