Diagnosing a shaking steering wheel - can a bad wheel bearing cause vibration at high speeds

2024-06-16 02:33:10

In 1986 Timken reorganized its corporate structure, cutting costs by consolidating departments and eliminating personnel. The Rock Bit Division was sold off entirely. A new division, the Original Equipment—Bearings group, was formed by combining the Industrial Division with the Automotive and Railroad Divisions. In addition, all Research and Development functions and computer operations were organized into a newly created Technology Center.

Timken’s sales continued to grow steadily through the first half of the 1960s, climbing from $240 million in 1961 to $393 million in 1966. In 1963 production began at the company’s new Colmar Plant in France. Timken Research, a sprawling research and development center located near the Akron-Canton Airport, was completed in 1966. Railroad companies continued to grow in importance as customers during this period. By 1968, more than 90 percent of the new freight cars being built used tapered roller bearings, and more than 60 percent of those bearings were made by Timken.

Shop all 2006 Ford Explorer Wheel Bearings, Hubs & Seals products available now on NAPAonline and for pickup at your local NAPA Auto Parts store!

H. H. Timken, Jr., died in 1968, and was succeeded as chairman by his brother W. Robert Timken. The company presidency was assumed by Herbert Markley, who had joined the company as an accountant nearly 30 years earlier. In 1970 the corporation’s name was officially shortened to The Timken Company. The following year, the Gaffney Bearing Plant, a highly automated facility in South Carolina, was opened. Timken was hurt in 1970 by strikes at General Motors and in the trucking industry. By 1972, however, sales were once again strong in the automotive industry, which, as a whole, was the purchaser of nearly half of the bearings sold by Timken. As a result, Timken’s sales began to grow once again, reaching a company record of $470 million in 1972. In 1974 a wholly owned sales subsidiary, Nihon Timken K.K., was formed in Japan.

Bearings might not seem like the most progressive of industries, yet Timken has maintained a leading 30 percent market share by aggressively investing in R&D and state-of-the-art manufacturing facilities. Timken also produces millions of tons of steel alloy each year through its Latrobe Steel unit. Among the uses of Latrobe’s products are components for automobile axles and fasteners for space shuttles. The company’s stock is one-third owned by the Timken family and employees.

Where areKoyobearingsmade

Gerdel, Thomas W., “Timken Abandons Tradition; Outsourcing Steel, Reorganization Aim at Greater Global Efficiency,” Plain Dealer (Canton, Ohio), May 3, 2001, p. 1C.

62/22-2RSR FAG available at ABF.store ? Same-day shipment ? 10.000.000 bearings and electric motors ? Worldwide delivery ? Customer Service in 8 languages.

Where are Timkenwheelbearingsmade

Timken’s sales declined slightly in both 1991 and 1992, largely due to reduced demand caused by the global recession. For 1991, the company recorded a net loss of $36 million. Through an active streamlining program, Timken was able to turn a modest profit of $4.45 million in 1992 without making any gains in sales. In April of 1993 the company announced the formation of a steel sales unit in Europe, its first such steel operation outside of the United States. Efforts to improve manufacturing efficiency and to reduce costs throughout the corporation continued. Construction began on a new bearing plant in Ashboro, North Carolina, in 1993, the same year the company began operations at a steel parts plant in Eaton, Ohio. Latrobe Steel planned to open a new facility in Franklin, Pennsylvania, in 1994.

TimkenManufacturing

Introduction to Seal Cross Reference National. In the world of industrial components, ensuring compatibility and reliability is paramount. The seal cross ...

During the second half of the 1960s, Timken’s sales levelled off, and net income actually shrank, from $49 million in 1966 to $29 million in 1970. The portion of this income that came from foreign sales tripled between 1967 and 1970. In 1968 a continuous casting plant was added to the company’s steelmaking facilities. By 1969, the plant had a capacity of 850,000 tons. The company’s Ashland Plant was opened in 1969 as well. Timken had a total of 16 plants in operation by 1971, seven of which were in Ohio. Tapered roller bearings and rock bits accounted for about 80 percent of Timken’s revenue that year, with specialty steels generating the rest of the company’s sales. At that time, about 35 different types of roller bearings were being produced in over 11,000 sizes at its facilities.

A web site, Timken Direct, debuted in April 1999. It relieved sales reps from routine availability and price questions, and gave Timken’s distributor customers more power to find needed information on their own.

In 1909 the Timken brothers moved the axle division to Detroit, launching the new Timken-Detroit Axle Company with William Timken as its president. The Canton operation continued to manufacture bearings, and its name was changed to The Timken Roller Bearing Company. By 1909, the year Henry Timken died, the company was turning out over 850,000 bearings a year, and it employed about 1,200 people.

In 1954 Timken introduced the “AP” bearing, an innovation that would have a great impact on the railroad industry. The “AP” was a preassembled, prelubricated, self-contained bearing that was inexpensive and easily integrated into nearly any type of railroad car. The new bearing was credited with dramatically reducing the number of freight car set-outs. The “AP” bearing was initially produced at Timken’s Columbus plant. So quickly did demand for it grow, however, that by 1958, the new Columbus Railroad Bearing Plant was opened. In 1956 the Bucyrus Distribution Center was opened. The Distribution Center was a huge warehouse, from which bearings were shipped to customers throughout the United States, as well as to the company’s foreign plants. In 1958 Australia became the fourth continent on which Timken operations took place, with the opening of a bearing plant at Ballarat, Victoria. That year, SAFT was officially merged into Timken, and its name was changed to Timken France. Timken purchased the remaining shares of British Timken the following year.

Where areSKFbearingsmade

History of the Timken Company, Canton: The Timken Company, 1990. McManus, George J., “Timken Steers Its Own Course—Successfully,” Iron Age, May 10, 1976, pp. 33–40.

The Timken Company is the world’s largest manufacturer of tapered roller bearings. A tapered roller bearing consists of a set of rolling elements between two concentric rings. The design of these bearings, based on Henry Timken’s patents from the late 19th century, allows them to virtually eliminate friction created in hauling heavy loads. Timken bearings are used in a wide variety of industries, including automotive, aerospace, and railroads. MPB Corporation, a wholly owned subsidiary of Timken, produces super-precision and miniature bearings, whose applications include missile guidance systems and computer disk drives. Timken also produces about 1.5 million tons of steel alloy each year, and is the leading manufacturer of Seamless mechanical steel alloy tubing in the world. The Latrobe Steel Company, another wholly owned subsidiary, produces more than 300 grades of steel. Among the uses of Latrobe’s products are components for automobile axles and fasteners for space shuttles. While Timken’s steel facilities are concentrated in the United States, the company as a whole has operations in 20 countries on 6 continents, totalling 100 plants and offices overall.

The market for Timken bearings and steel continued to expand quickly throughout the 1920s. In 1920 the company opened the Columbus Bearing Plant, its first facility outside of Canton. The same year, a waste treatment plant was built at the Canton facility. Timken stock went on sale to the public for the first time in 1922, and the company opened an assembly plant in Canada that year. Timken bearings found their way into the railroad industry in 1923, when bearings specially designed by Timken were tested first on an inter-city streetcar running between Canton and Cleveland, and later that year in a boxcar on the Wheeling and Lake Erie Railroad. By 1926, other railroads recognized that the tapered bearings would allow the speed of their trains to increase. A large order was placed by the Chicago, Milwaukee, St. Paul & Pacific railroad for use in its highspeed trains, such as the Burlington Zephyr and the Santa Fe Super Chief.

Timken began acquiring smaller companies in the mid-1920s. In 1925 the company purchased the assets of Gilliam Manufacturing Co., a Canton-based roller bearing producer. The Bock Bearing Co. of Toledo, Ohio, was acquired the following year. In 1927 Timken purchased a large interest in British Timken Ltd. from Vickers Ltd., which had been manufacturing Timken bearings and axles under license since 1909. Timken went on to acquire the remainder of the British operation in 1959. The Weldless Steel Company’s Wooster, Ohio, piercing mill was purchased in 1928. 1928 also brought the creation of Societe Anonyme Francaise Timken (SAFT), a French subsidiary of British Timken. In 1929 Timken purchased a 177-acre block of land adjacent to the company’s existing facilities in Canton, and opened two new plants, the Gambrinus Steel Plant and the Gambrinus Bearing Plant.

In March 2000, Timken announced plans to cut 600 jobs worldwide—half of them at the Duston, England plant—while increasing production in Central Europe. The company had already trimmed 1,700 jobs in the previous two years, aiming to reduce costs in the face of excess industry capacity.

"The Timken Company ." International Directory of Company Histories. . Encyclopedia.com. 17 Dec. 2024 .

The hub assembly for your Dodge Dart has a bearing that makes it possible for the wheel to spin. Hub assemblies also include the wheel hub and wheel studs that ...

"The Timken Company ." International Directory of Company Histories. . Encyclopedia.com. 17 Dec. 2024 .

Within the “Cite this article” tool, pick a style to see how all available information looks when formatted according to that style. Then, copy and paste the text into your bibliography or works cited list.

"The Timken Company ." International Directory of Company Histories. . Encyclopedia.com. (December 17, 2024). https://www.encyclopedia.com/books/politics-and-business-magazines/timken-company-0

Where areMoog wheelbearingsmade

Pruitt, Bettye, Timken, Harvard Business School, 1999. “Recession Buying Speeds Timken’s Automatic Look,” Business Week, September 20, 1958, pp. 160–62.

In spite of the Depression, Timken continued to grow steadily through the 1930s. During the early 1930s the company developed bearings for propeller drive-shafts, thereby expanding its customer base to include shipbuilders, including the U.S. Navy. In 1932 Timken began manufacturing removable rock bits for construction and mining equipment. The production of the rock bits provided a much needed outlet for the company’s steel in the face of a badly depressed steel market. By that year, British Timken had stretched to yet another continent, opening a manufacturing subsidiary in South Africa in 1932. In 1934 William Umstattd became president of Timken, succeeding H. H. Timken, who stayed on as chairman of the board. The company’s Mt. Vernon Rock Bit Plant opened the following year. When H. H. Timken died in 1940, his son, H. H. Timken, Jr., became the chairman of Timken’s board of directors.

Timken’s sales declined slightly in both 1991 and 1992, largely due to reduced demand caused by the global recession. For 1991, the company recorded a net loss of $36 million. Through an active streamlining program, Timken was able to turn a modest profit of $4.45 million in 1992 without making any gains in sales. In April 1993 the company announced the formation of a steel sales unit in Europe, its first such steel operation outside of the United States. Efforts to improve manufacturing efficiency and to reduce costs throughout the corporation continued. In 1993 the company began operations at a steel parts plant in Eaton, Ohio. Latrobe Steel planned to open a new facility in Franklin, Pennsylvania, in 1994.

The company celebrated its 100th anniversary in style. A detailed company history was commissioned and provided to each of its employees around the world. A small group of Timken employees and retirees restored a rare 1904 St. Louis car, one of the first designs to incorporate Timken’s roller bearings.

Timken’s 50-year-old plant in Bucyrus, Ohio, continued to spit out small bearings—2.5 million of them a week—from a highly automated, finely tuned mix of vintage and computerized equipment. Other plants specialized in quick turnarounds of custom orders. In the 1990s, Timken had begun developing “bearings packages,” integrating bearings with other components into modular systems.

The Morrgrease Automatic Lubricator contains its own unique chemical expulsion unit. This has no springs or mechanisms but relies on an unvarying law of nature. Built into the top of each Morrgrease Automatic Lubricator is a flexible rubber expansion chamber containing a liquid electrolyte and a galvanic element. The unit is activated by injecting the galvanic element into the electrolyte. The resultant electro-chemical reaction generates a steadily increasing amount of gas, which gradually expands against a piston, to extrude the lubricant slowly but surely into the bearing to which the Morrgrease Automatic Lubricator is fitted. The chemicals and gas remain hermetically sealed within the expansion chamber so that no contamination of the lubricant can occur, even after the unit itself is spent. During the working life of the Morrgrease Automatic Lubricator, an indicating ring on the ejection piston shows through translucent windows in the body to enable the discharge state to be monitored.

The onset of World War II provided the momentum for Timken’s continued growth in the 1940s. To meet increasing wartime demand for its products, Timken opened several new facilities in Ohio during this period. In 1941, for example, the Timken Ordnance Company was built in Canton, where about 80,000 gun tubes were manufactured over the next couple of years. The Zanesville Bearing Plant was opened in 1943. Other new locations included Columbus and Newton Falls. During the war, the company’s output more than doubled its previous peak. In 1948 Timken began experimenting with automation, beginning a pilot project at a plant in Bucyrus, Ohio. The project was an instant success, and a brand new plant was built in 1950.

Public Company Incorporated: 1899 as Timken Roller Bearing Axle CompanyEmployees: 16,729Sales: $1.6 billionStock Exchanges: New YorkSICs: 3562 Ball and Roller Bearings; 3312 Blast Furnaces and Steel Mills.

Uchitelle, Louis, “Who’s Afraid Now That Big Is No Longer Bad?” Journal Record (Oklahoma City, Oklahoma), November 10, 2000, pp. 1 +.

Radial Ball Bearings are to reduce rotational friction and support radial loads. Ideal for precision work with close tolerances suitable for building models ...

2023610 — Timken bearings aren't U.S. made anymore, and are "sourced" from (guess where) steel. So if you're buying based on brand name, it's likely you' ...

In May 2001, Timken was rumored to be in alliance talks with a Japanese rival, NSK Ltd. Timken acknowledged a long-term supplier relationship with NSK but denied any pending joint ventures.

Timken Aerospace & Super Precision Bearings; Timken Aerospace & SuperPrecision Bearings-Europa B.V. (Netherlands) ; Timken Aerospace & Super Precision Bearings-Singapore Pte. Ltd.; Timken Aerospace & Super Precision Bearings-UK, Ltd.; Australian Timken Proprietary, Limited (Australia) ; Timken do Brasil Comercio e Industria, Ltda. (Brazil) ; British Timken Limited (U.K.) ; Canadian Timken, Limited (Canada) ; Timken Communications Company; Timken Desford Steel Limited (U.K.) ; EDC, Inc.; Timken Engineering and Research - India Private Limited; Timken España, S.L. (Spain) ; Timken Europa GmbH (Germany) ; Timken Europe B.V. (Netherlands) ; Timken Finance Europe B.V. (Netherlands) ; Handpiece Headquarters Corp.; Timken India Limited (80%) ; Timken Italia, S.R.L. (Italy) ; Timken Latrobe Steel; Timken Latrobe Steel Distribution; Timken Latrobe Steel-Europe Ltd. (U.K.) ; Timken de Mexico S.A. de C.V.; MPB Export Corporation; Nihon Timken K.K. (Japan) ; Timken Polska Sp.z.o.o. (Poland) ; Rail Bearing Service Corporation; Timken Romania S.A. (92%) ; The Timken Corporation; The Timken Service & Sales Co.; Timken Servicios Administrativos S.A. de C.V. (Mexico) ; Timken Singapore Pte. Ltd.; Timken South Africa (Pty.) Ltd.; Timken de Venezuela C.A.; Yantai Timken Company Limited (China) .

We will be the best-performing manufacturing company in the world as seen through the eyes of our customers and shareholders. To grow profitably, maximize shareholder value and sustain industry leadership, our diverse team of associates will capitalize on the relationships between our businesses, emphasize applying advanced technology to products and processes and provide unmatched customer service. We will remain an independent organization with a leadership position in high-quality anti-friction bearing and alloy steel products as well as related services .

Encyclopedia.com gives you the ability to cite reference entries and articles according to common styles from the Modern Language Association (MLA), The Chicago Manual of Style, and the American Psychological Association (APA).

Automotive; Industrial; Aerospace and Super Precision; Rail; Alloy Steel; Specialty Steel; Precision Steel Components; Emerging Markets.

After six years of showing little or no profit, Timken rebounded in 1988, earning $65.9 million on net sales of $1.55 billion. During that year offices were opened in Italy, Korea, Singapore, and Venezuela. The following year, a 37-day strike by steel workers prevented a significant continuation of the rally.Never-theless, a $1 billion multi-year investment program was launched in 1989 to modernize and expand the company’s plants. In 1990 Timken paid $185 million for MPB Corporation, a manufacturer of super-precision bearings (used in sensitive machinery such as aircraft, computer disk drives, and medical equipment) based in Keene, New Hampshire, with annual sales of $120 million.

Within the next couple of years, the axle business began to outgrow its allotted space in the St. Louis carriage plant, and in 1902 the company relocated to Canton, Ohio. Canton was seen as an ideal midpoint between Detroit, home of the automotive industry, and Pittsburgh, a steel-producing city. By that time, the Timkens had recognized the future importance of the automobile, and worked to develop bearings tailored to the needs of that young industry. When Henry Ford introduced the automobile assembly line and the Model T that it produced in 1908, the demand for Timken bearings and axles grew exponentially. In 1909 the Timken brothers broke off the axle division and moved it to Detroit, launching the new Timken-Detroit Axle Company with William Timken as its president. The Canton operation continued to manufacture bearings, and its name was changed to The Timken Roller Bearing Company. By 1909, the year Henry Timken died, the company was turning out over 850,000 bearings a year, and it employed about 1,200 people.

Timken began to produce its own steel in 1915 as a way to ensure an adequate supply for its manufacturing in the face of shortages created by World War I. That year, the company added a steel tube mill to its Canton facilities. A year later a melt shop was added. With the inclusion of these steel works, Timken became the first bearing manufacturer to act as its own supplier of steel for its products. The company was soon producing steel in quantities far greater than its own manufacturing needs. It therefore began marketing its alloy steel to outside buyers, with such companies as Mack Truck among its early regular customers. In 1919 the Industrial Division was organized, taking the place of the company’s Farm Implement and Tractor Division. The mission of the Industrial Division was to develop bearings for a wide variety of industrial uses, including electric motors, elevators, and printing presses.

1835 Dueber Ave., S.W.Canton, Ohio 44706-2798U.S.A.Telephone: (216) 438-3000Fax: (216) 471-3810Web site: http://www.timken.com

The onset of World War II provided the momentum for Timken’s continued growth in the 1940s. To meet increasing wartime demand for its products, Timken opened several new facilities in Ohio during this period. In 1941, for example, the Timken Ordnance Company was built in Canton, where about 80,000 gun tubes were built over the next couple of years. The Zanesville Bearing Plant was opened in 1943. Other new locations included Columbus and Newton Falls. During the war, the company’s output more than doubled its previous peak. In 1948 Timken began experimenting with automation, beginning a pilot project at a plant in Bucyrus, Ohio. The project was an instant success, and a brand new plant was built in 1950.

After six years of showing little or no profit, Timken rebounded in 1988, earning $65.9 million on net sales of $1.55 billion. During that year offices were opened in Italy, Korea, Singapore, and Venezuela. The following year, a 37-day strike by steel workers prevented a significant continuation of the rally. Nevertheless, a $1 billion multi-year investment program was launched in 1989 to modernize and expand the company’s plants. In 1990 Timken paid $185 million for MPB Corporation, a manufacturer of super-precision bearings (used in sensitive machinery such as aircraft, computer disk drives, and medical equipment) based in Keene, New Hampshire, with annual sales of $120 million.

"The Timken Company ." International Directory of Company Histories. . Retrieved December 17, 2024 from Encyclopedia.com: https://www.encyclopedia.com/books/politics-and-business-magazines/timken-company-0

In 1954 Timken introduced the “AP” bearing, an innovation that would have a great impact on the railroad industry. The “AP” was a preassembled, prelubricated, self-contained bearing that was inexpensive and easily integrated into nearly any type of railroad car. The new bearing was credited with dramatically reducing the number of freight car set-outs. The” AP” bearing was initially produced at Timken’s Columbus plant. So quickly did demand for it grow, however, that by 1958, the new Columbus Railroad Bearing Plant was opened. In 1956 the Bucyrus Distribution Center was opened. The Distribution Center was a huge warehouse, from which bearings were shipped to customers throughout the United States, as well as to the company’s foreign plants. In 1958 Australia became the fourth continent on which Timken operations took place, with the opening of a bearing plant at Ballarat, Victoria. That year, SAFT was officially merged into Timken, and its name was changed to Timken France. Timken purchased the remaining shares of British Timken the following year.

Shen Bin, and Xie Liangjun, “Bearing Giants Bolster Business in China,” China Daily, North American ed., September 29, 1997, p. 5.

Henry Timken founded the earliest form of The Timken Company in St. Louis in 1899. Timken had entered the carriage business as an apprentice 40 years earlier at the age of 16. By the time he was 24, Timken had opened his own carriage shop. In 1877 Timken received the patent for the Timken Buggy Spring, the first of his 13 patents. His spring design became widely used throughout the country, and was produced on a royalty basis by a number of companies. As a result of the spring’s success, Timken became well known across the United States, and his carriage business flourished. Around 1895 Timken took an interest in the problems created by friction in wagon design. In 1898 the patent was issued for the Timken tapered roller bearing. The new bearing was a dramatic improvement over the ball bearings and straight roller bearings that had previously been used. The following year, the founder and his two sons, William and Henry (H. H.) Timken, organized the Timken Roller Bearing Axle Company. It produced axles that used the new bearing in their design.

Are Timken bearingsgood

W. Robert Timken stepped down in 1975, and was replaced as chairman of the Board by his son, W. R. Timken, Jr. That year Timken acquired Latrobe Steel Company, a Pennsylvania based producer of specialty steel and alloys. For 1975, Timken was able to post record sales of $804 million, in spite of a terrible year in the automobile industry. In 1978 construction was completed on the company’s Canton Water Purification Plant. Timken introduced the UNIPAC bearing in 1979. These pre-lubricated and pre-adjusted bearings made assembly operations much easier for vehicle, industrial machinery, and construction equipment manufacturers. Timken also opened the Lincolnton Bearing Plant that year. The Lincolnton plant, located 50 miles north of Gaffney in North Carolina, featured such advanced automation as driverless trains that transported parts between departments. 1979 also brought about Markley’s mandatory retirement as company president. He was succeeded by Joseph F. Toot, Jr., a Timken employee since 1962.

The market for Timken bearings and steel continued to expand quickly throughout the 1920s. In 1920 the company opened the Columbus Bearing Plant, its first facility outside of Canton. The same year, a waste treatment plant was built at the Canton facility. Timken stock went on sale to the public for the first time in 1922, and the company opened an assembly plant in Canada that year. Timken bearings found their way into the railroad industry in 1923, when bearings specially designed by Timken were tested first on an inter-city streetcar running between Canton and Cleveland, and later that year in a boxcar on the Wheeling and Lake Erie Railroad. By 1926, other railroads recognized that the tapered bearings would allow the speed of their trains to increase. A large order was placed by the Chicago, Milwaukee, St. Paul & Pacific railroad for use in its high speed trains, such as the Burlington Zephyr and the Santa Fe Super Chief.

Plants in Australia and England were closed. Although sales of excess steel made up a third of Timken’s revenues, the company was relying more heavily on outside sources as it expanded production into countries such as China and India. The company also aimed to adopt more efficient processes, opting for hot-forging over metal-cutting in some instances. There was also a trend towards smaller, more specialized factories. Among Timken’s most advanced products at the beginning of the millennium were anti-lock bearings for four-wheel-drive vehicles that employed built-in sensors.

Timken began to produce its own steel in 1915 as a way to ensure an adequate supply for its manufacturing in the face of shortages created by World War I. That year, the company added a steel tube mill to its Canton facilities. A year later a melt shop was added. With the inclusion of these steel works, Tim-ken became the first bearing manufacturer to act as its own supplier of steel for its products. The company was soon producing steel in quantities far greater than its own manufacturing needs. It therefore began marketing its alloy steel to outside buyers, with such companies as the Mack Truck Company among its early regular customers. In 1919 the Industrial Division was organized, taking the place of the company’s Farm Implement and Tractor Division. The mission of the Industrial Division was to develop bearings for a wide variety of industrial uses, including electric motors, elevators, and printing presses.

W. Robert Timken stepped down in 1975, and was replaced as chairman of the board by his son, W.R. Timken, Jr. That year Timken acquired Latrobe Steel Company, a Pennsylvania-based producer of specialty steel and alloys. For 1975, Timken was able to post record sales of $804 million, in spite of a terrible year in the automobile industry. In 1978 construction was completed on the company’s Canton Water Purification Plant. Timken introduced the UNIPAC bearing in 1979. These pre-lubricated and pre-adjusted bearings made assembly operations much easier for vehicle, industrial machinery, and construction equipment manufacturers. Timken also opened the Lincolnton Bearing Plant that year. The Lincolnton plant, located 50 miles north of Gaffney in North Carolina, featured such advanced automation as driverless trains that transported parts between departments. Markley faced mandatory retirement as company president in 1979. He was succeeded by Joseph F1. Toot, Jr., a Timken employee since 1962.

May 31, 2022 — #1: Sluggish Acceleration ... One of the first signs of worn out wheel bearings you should look out for is what feels like a reduction in your ...

Public CompanyIncorporated: 1899 as Timken Roller Bearing Axle CompanyEmployees: 20,500Sales: $2.64 billion (2000)Stock Exchanges: New YorkTicker Symbol: TKRNAIC: 332991 Ball and Roller Bearing Manufacturing; 31111 Iron and Steel Mills

REAR WHEEL HUB & BEARING ASSEMBLY W/ WHEEL SPEED SENSOR & WHEEL STUDS (ACD # 20-55) (GM # 7470555)

H.H. Timken, Jr., died in 1968, and was succeeded as chairman by his brother W. Robert Timken. The company presidency was assumed by Herbert Markley, who had joined the company as an accountant nearly 30 years earlier. In 1970 the corporation’s name was officially shortened to The Timken Company. The following year, the Gaffney Bearing Plant, a highly automated facility in South Carolina, was opened. Timken was hurt in 1970 by strikes at General Motors and in the trucking industry. By 1972, however, sales were once again strong in the automotive industry, which, as a whole, was the purchaser of nearly half of the bearings sold by Timken. As a result, Timken’s sales began to grow once again, reaching a company record of $470 million in 1972. In 1974 a wholly owned sales subsidiary, Nihon Timken K.K., was formed in Japan.

Where areNSKbearingsmade

As the 1980s began, Timken was still the dominant force in the American bearing industry, controlling about 25 percent of the U.S. bearings market, and 75 percent of the market for tapered roller bearings. In 1981 the company earned $101 million on sales of $1.4 billion. The 1980s proved to be a difficult decade for Timken, however. The company reported a loss of $3 million in 1982, its first unprofitable year since the Depression. Part of the problem was the flood of cheap bearings entering the United States from Europe and Japan. Nevertheless, Timken did not stop investing in its facilities during this time. In 1983 an expansion project that doubled the size of Timken Research was completed. The company’s $450 million Faircrest Steel Plant went into production in 1985. Upon the opening of the plant, which was situated not far from Canton, Timken’s steelmaking capacity increased by 50 percent, to 1.5 million tons. In 1986 Timken reorganized its corporate structure, cutting costs by consolidating departments and eliminating personnel. The Rock Bit Division was sold off entirely. A new division, the Original Equipment—Bearings group was formed by combining the Industrial Division with the Automotive and Railroad Divisions. In addition, all Research and Development functions and computer operations were organized into a newly created Technology Center.

During the second half of the 1960s, Timken’s sales leveled off, and net income actually shrank, from $49 million in 1966 to $29 million in 1970. The portion of this income that came from foreign sales tripled between 1967 and 1970. In 1968 a continuous casting plant was added to the company’s steelmaking facilities. By 1969, the plant had a capacity of 850,000 tons. The company’s Ashland Plant was opened in 1969 as well. Timken had a total of 16 plants in operation by 1971, seven of which were in Ohio. Tapered roller bearings and rock bits accounted for about 80 percent of Timken’s revenue that year, with specialty steels generating the rest of the company’s sales. At that time, about 35 different types of roller bearings were being produced in over 11,000 sizes at its facilities.

Around this time, Timken began its expansion into South America. A sales subsidiary was established in Argentina in 1959. 1960 marked the opening of the Sao Paulo Bearing Plant in Brazil. That year, W. Robert Timken (another son of H. H. Timken) replaced Umstattd as company president. Timken’s sales continued to grow steadily through the first half of the 1960s, climbing from $240 million in 1961 to $393 million in 1966. In 1963 production began at the company’s new Colmar Plant in France. Timken Research, a sprawling research and development center located near the Akron-Canton Airport, was completed in 1966. Railroads continued to grow in importance as customers during this period. By 1968, more than 90 percent of the new freight cars being built used tapered roller bearings, and more than 60 percent of those bearings were made by Timken.

Meanwhile, Timken was the subject of an antitrust suit brought by the Justice Department around the same time. After several levels of appeals, the Supreme Court ruled in 1951 that Timken had conspired with its foreign affiliates (British and French Timken) in restraint of trade. The case, initiated in 1947, came about as a result of agreements between the companies regarding sales territories, price coordination, exchange of exclusive information, and other practices. The court’s ruling indicated that a company must compete with other companies in which it holds a substantial interest if that company is not a legal subsidiary.

The Morrgrease single point automatic lubricator is filled with premium quality multi-purpose grease. Supplying a continuous and precise volume of grease, the Morrgrease product provides users with the optimum lubrication that can be used in many different applications. As a cost-effective alternative to manual lubrication, the Morrgrease Automatic Lubricator can help to prolong asset life and reduce downtime.

Because each style has its own formatting nuances that evolve over time and not all information is available for every reference entry or article, Encyclopedia.com cannot guarantee each citation it generates. Therefore, it’s best to use Encyclopedia.com citations as a starting point before checking the style against your school or publication’s requirements and the most-recent information available at these sites:

That same year, Timken’s most advanced plant to date opened in Asheboro, North Carolina, at a cost of $120 million. Its automated features allowed the company to produce small batches of custom bearings in a matter of days, rather than weeks, reported Forbes. Another new factory was opened in Singapore to produce the minuscule bearings used in computer disk drives. Even as these facilities were being constructed, the company’s annual earnings were reaching their highest levels since 1988, though the company had lost money in 1991 and 1993. By 1996, earnings had risen to $138.9 million. Analysts attributed the performance to reducing production costs and finding niches outside the company’s traditional, cyclical lines of business.

Henry Timken founded the earliest form of The Timken Company in St. Louis in 1899. Timken had entered the carriage business as an apprentice 40 years earlier at the age of 16. By the time he was 24, Timken had opened his own carriage shop. In 1877 Timken received the patent for the Timken Buggy Spring, the first of his 13 patents. His spring design became widely used throughout the country, and was produced on a royalty basis by a number of companies. As a result of the spring’s success, Timken became well known across the United States, and his carriage business flourished. Around 1895 Timken took an interest in the problems created by friction in wagon design. In 1898 the patent was issued for the Timken tapered roller bearing. The new bearing was a dramatic improvement over the ball bearings and straight roller bearings that had previously been used. The following year, the founder and his two sons, William and Henry (H. H.) Timken, organized the Timken Roller Bearing Axle Company. The company produced axles that used the new bearing in their design.

Jul 31, 2023 — Unlike belts, timing chains are made of metal and resemble bicycle chains. They serve the same purpose as timing belts—connecting the crankshaft ...

The Wiha 29249 Specifications: Brand: TORXPlus; Product Type: EasyTorque Screwdriver Handle with TorxPlus® Blades; Drive Size: IP8; Accuracy: ±10%; Grip ...

In February 1999, Timken postponed the launch of a new $110 million seamless tube mill, citing weaknesses in the energy, farm, and heavy industrial markets. Most pressing was the lack of suitable agreements with government agencies, suppliers, and unions to get the plant running profitably. Sites in Ohio, Georgia, North Carolina, and Virginia were being considered.

Where areNationalbearingsmade

In late 1997 Toot retired as president and CEO. Chairman William R. Timken, Jr., great grandson of the company founder, took over Toot’s duties. After an all-time record first quarter, the Asian financial crisis resulted in reduced orders for farm equipment and less business for Timken in the second half of 1998. For the year, income fell from $171 million to $114 million, on sales of $2.7 billion. Timken’s share price also fell during the year, from $41 to $13.

In spite of the Depression, Timken continued to grow steadily through the 1930s. During the early 1930s the company developed bearings for propeller drive-shafts, thereby expanding its customer base to include shipbuilders and the U.S. Navy. In 1932 Timken began manufacturing removable rock bits for construction and mining equipment. The production of the rock bits provided a much needed outlet for the company’s steel in the face of a badly depressed steel market. By that year, British Timken had stretched to yet another continent, opening a manufacturing subsidiary in South Africa in 1932. In 1934 William Umstattd became president of Timken, succeeding H.H. Timken, who stayed on as chairman of the board. The company’s Mt. Vernon Rock Bit Plant opened the following year. When H.H. Timken died in 1940, his son, H.H. Timken, Jr., became the chairman of Timken’s board of directors.

Around this time, Timken began its expansion into South America. A sales subsidiary was established in Argentina in 1959. The next year saw the opening of the Sao Paulo Bearing Plant in Brazil. Also in 1960, W. Robert Timken (another son of H.H. Timken) replaced Umstattd as company president.

The Timken Company is widely recognized as a well-run company that manufactures products of the highest quality. Because this status has been achieved to a large degree by a willingness to invest heavily in research and facility modernization, it seems likely that Timken will be able to fight off any challengers that might arise in its own industry. The most serious challenges that the company faces are those that arise from its dependence on the health of the many different industries whose companies integrate Timken bearings and steel into their own products.

A pressure relief valve is provided to guard against the possibility of the Morrgrease Automatic Lubricator being fitted unwittingly to a bearing with blocked grease ways. Should the pressure built up by the Morrgrease Automatic Lubricator prove insufficient to clear the blockage, the valve will open to allow the lubricant to escape and prevent excessive pressurisation of the Morrgrease Automatic Lubricator. The exudation of lubricant around the Morrgrease Automatic Lubricator will serve as a warning that the grease ways are blocked & that no lubrication is taking place.

Timken began acquiring smaller companies in the mid-1920s. In 1925 the company purchased the assets of Gilliam Manufacturing Co., a Canton-based roller bearing producer. The Bock Bearing Co. of Toledo, Ohio, was acquired the following year. In 1927 Timken purchased a large interest in British Timken Ltd. from Vickers Ltd., which had been manufacturing Timken bearings and axles under license since 1909. Timken went on to acquire the remainder of the British operation in 1959. The Weldless Steel Company’s Wooster, Ohio, piercing mill was purchased in 1928. That year also brought the creation of Société Anonyme Française Timken (SAFT), a French subsidiary of British Timken. In 1929 Timken purchased a 177-acre block of land adjacent to the company’s existing facilities in Canton and opened two new plants, the Gambrinus Steel Plant and the Gambrinus Bearing Plant.

"The Timken Company ." International Directory of Company Histories. . Encyclopedia.com. (December 17, 2024). https://www.encyclopedia.com/books/politics-and-business-magazines/timken-company

bearing