>> The sizes shown are average design values for tires measured on specified measuring rim widths. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width. >> Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width. >> Tread patterns are often tuned to accomodate different tire widths. Tires for a particular dimension of a given tireline may vary in appearance from the tire shown in the photograph. WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations. DANGER: Never mount a 16" diameter tire on a 16.5" rim. Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. Exceeding the lawful speed limit is neither recommended nor endorsed. For high-speed driving, additional inflation pressure and possibly reduced tire loading and/or upsizing is required. In the absence of specific recommendations by the vehicle manufacturer, use the following guidelines based on those in the European Tyre and Rim Technical Organization Standards Manual. For speeds over 160km/h (100 mph), load and inflation must be adjusted according to the table below. S-Speed Rated Sizes: Maximum Speed (mph)  100  106  112 Inflation Increase (psi)  0.0  1.0  2.0 Load Capacity (% of max.)  100  100  100 T-Speed Rated Sizes: Maximum Speed (mph)  100  106  112  118 Inflation Increase (psi)  0.0  1.0  2.0  3.0 Load Capacity (% of max.)  100  100  100  100

Tessilmareradial 40

All BFGoodrich tires have a Standard Manufacturer's Limited Warranty, which covers defects in workmanship and materials for the life of the original usable tread, or for 6 years from date of purchase, whichever occurs first.

I have to do all four of the wheel bearings not only because it's probably the smarter thing to do but because I'm not sure which specific one it is that's failing. I hear a really guttural grinding noise at 25 mph and sometimes but very rarely at 35 or 45. But once I get into higher speeds I get a grind every other second. From 50-55 I also get a super high pitched grinding noise that isn't loud or really too noticable, plus it only happens when I step on the gas. Maybe I don't need to replace the bearings, any thoughts?

This subreddit has gone dark as part of a mass protest against Reddit's recent API changes, which break third-party apps and moderation tools. ++ The sub will remain private for at least 48hr from 0000UTC on 12th June 2023. ++ We look forward to seeing you later, and thank you for your understanding.