Floating bearingturbo

During installation, it is important to ensure that the floating bearing has approximately the same amount of clearance in both directions. The design of the fixed floating bearing system recommended by us can be seen in the illustrations below. The connection surfaces for the guides and carriages should have good evenness (e.g. milled surface) in order to avoid tension in the system. Minor unevenness in the connecting surfaces can be compensated to a certain extent by floating bearings.

If the 2:1 rule is not observed when using linear plain bearings, the result is uneven movement or even blocking of the system. This can often be remedied with relatively simple modifications.

Floating bearingvs fixedbearing

When using systems with two parallel guides, one side must be designed as a floating bearing. There is a suitable locating/non-locating bearing solution for every installation position, whether horizontal, vertical or lateral. This installation method prevents stiffness or jamming of the guide in the event of parallelism deviations between the guides. The floating bearing is realised by the controlled extension of the clearance in the direction of the anticipated parallelism error. This creates an additional degree of freedom on one side.

A few recommendations must be observed for the successful use of maintenance-free drylin® linear bearings**:** If the distance between the driving force and the fixed bearing is more than twice the bearing distance (2:1 rule), a static friction coefficient of 0.25 theoretically leads to jamming of the guidance.

Floating bearingarrangement

The terms "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "RCYL", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "tribotape", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" and "yes" are legally protected trademarks of igus® GmbH/Cologne in the Federal Republic of Germany and possibly in some foreign countries. This is a non-exhaustive list of trademarks (such as pending trademark applications or registered trademarks) of igus GmbH or igus-affiliated companies in Germany, the European Union, the US and/or other countries or jurisdictions.

Fan fixed andfloating bearingarrangement

Although drylin® W is a profile rail system, angle errors around the x-axis can be compensated. An angle of +/- 7° is available for this purpose. This effectively eliminates the distortions known from the assembly of sheet metal parts.

The principle is not dependent on the load or the drive force. It is a product of friction and always relates to the locating bearing. The further away the drive is from the guide bearing, the greater the wear and the drive force required.

We cannot complete your request due to a technical difficulty. You may return to the previous page or go to the homepage and explore other options. For immediate assistance please call us.

igus® GmbH would like to point out that it does not sell products from Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.

Users can reduce installation work with the drylin® W square profile. floating bearings, which can be selected in all directions (+/1 mm), compensate for misalignment and parallelism between the rails. Jamming, which can otherwise only be prevented by time-consuming parallel alignment of the system, can be ruled out.