The KM12 is an ultraminiature membrane force sensor. The force is introduced via the calotte (diameter 3mm, R15) in the center of the sensor. The force sensor is mounted on a flat surface. The centering of the force sensor takes place at the outside range, for example with 3 pens or by a 0.5mm deep flat reduction. The 9.8mm – 7.4mm ring forms the sensor's riot surface. In the center up to diameter 7.4mm, a casting mass is visible. The inner ring is not used for centering. For heb-securing, the riot surface can be fixed with PUR varnish on a flat surface. Due to the small dimensions, a cable with an external diameter of only 1.4mm is used. The processing of the litts AWG36 requires special tools (scalpel, Hoffmann Abisolierer-AWG36-26). The polyurethane coat is intended exclusively for fixed installation, not for mobile use. Alternatively, a version with a central cable finish is available (cable type: MESC-4x0014, PUR coat)

The KM12 is an ultraminiature membrane force sensor. The force is introduced via the calotte (diameter 3mm, R15) in the center of the sensor. The force sensor is mounted on a flat surface. The centering of the force sensor takes place at the outside range, for example with 3 pens or by a 0.5mm deep flat reduction. The 9.8mm – 7.4mm ring forms the sensor's riot surface. In the center up to diameter 7.4mm, a casting mass is visible. The inner ring is not used for centering. For heb-securing, the riot surface can be fixed with PUR varnish on a flat surface. Due to the small dimensions, a cable with an external diameter of only 1.4mm is used. The processing of the litts AWG36 requires special tools (scalpel, Hoffmann Abisolierer-AWG36-26). The polyurethane coat is intended exclusively for fixed installation, not for mobile use. Alternatively, a version with a central cable finish is available (cable type: MESC-4x0014, PUR coat)