I'd recommend replacing the serpentine belt and any hoses that look suspect. If you live in the rust belt, you'll probably need various other bits as well. If the book rate is something like 5 hours, and they charge say $125, then with tax paying MSRP on everything with all OEM parts you are looking at around $1400 including tax.

I'm at 130k and the timing belt looked in good shape still when the shop showed me the old one, but I wasn't taking a gamble any longer.

Ultrahigh temperature bearings

https://sixstarbernie.com/i-23188132-subaru-oem-timing-belt-kit-npw-water-pump-outback-legacy-06-12-2-5-sohc-100-usa-japan-parts.html?ref=category:1171146

If you are going all OEM parts, I can see it getting up into the $600 range for all the bits, then book rate is probably something like 6 hours, I imagine... so depending on your dealers hourly rate, $1400 with tax doesn't sound too horrible - definitely not getting a deal, but if done right, and you can't do it yourself, it's not horrible.

I have a 2010 LGT, had to remove the radiator fans, piping from the turbo outlet to intercooler, and two upper coolant hoses. I am not especially talented mechanically and was able to do it, so most people should not have problems if they take their time. Getting the new timing belt on with marks aligned was frustrating, but with the cam pulley tool and a mirror, I eventually got it.

High temperature bearingsSKF

20211226 — How long can I drive my car that needs new wheel bearings? Can't afford to get replacements, worried about more damage. It's just my front wheels.

When I was in for warranty repair, the dealer proactively gave me $1500 quote. The Turbo models are more difficult because you have to remove downpipe or exhaust manifold/turbo assemble to access the all water pump bolts. The charge pipe, air intake pipes, hoses make for a more difficult timing belt job as well.

High temperatureBearing Grease

1pcs 5x11x4 SMR115 ZZ Stainless Steel Ball Bearing SMR115 ZZ L1150ZZ Reel Bearing 5 * 11 * 4 RC Bearings(S608Z 8x22x7mm): Amazon.com: Industrial ...

NSK supplies railway vehicles with a wide variety of bearings for wheel axles, drive units, and traction motors. ... Since axle bearings are instrumental to train ...

Yeah I have decided to tackle it myself. The dealership is absolutely nuts if they want someone to pay that amount for that work.

I really think this is a reasonable DIY job if you have a few evenings to work on it. I did not need to remove the radiator, only the fans, and the hardest part was dealing with all of the rusty bolts.

High temperature bearingschart

I really think this is a reasonable DIY job if you have a few evenings to work on it. I did not need to remove the radiator, only the fans, and the hardest part was dealing with all of the rusty bolts.

I used the Continental kit and GMB tensioner, ended-up getting quite the shock when I pulled the timing belt covers off and found tons of rubber shavings. All of the small guides on the inner cover corners were digging into the existing timing belt. Readjusted all of them using the spacer tool provided for reinstallation of the main timing belt guide.

If you are doing the water pump and draining the radiator, not removing the radiator really doesn't save any time, maybe 1 minute. It is held in by two bolts.

High temperature bearingssizes

A Volkswagen Golf Wheel Bearing Replacement costs between $260 and $456 on average. Get a free detailed estimate for a repair in your area.

That is crazy that they would not replace the idlers, I ended up doing it myself after the dealer quoted me some insane number. I did not do the water pump and thermostat, though. My understanding is that Subaru water pumps rarely fail and if it ain't broke don't fix it

HightempBearingsInc

Anyway, I'd recommend replacing the idlers too, and it seems that's not automatically included in the job by dealers, at least by my one experience.

$1400 seems like a lot for 2.5i. I would think it would 800-900 range for a dealership to do a 2.5i timing with Subaru parts. (I am just a DIYer though) My dealer advertised $400 timing belt (just the belt) for 2.5i.

My wife's 2011 2.5i is almost to 100k and I called the dealership where she bought it from to get a quote on the water pump and timing belt replacement. They quoted me 1400$. Is that too much?

Sorry I can't answer your question with 5th gens, but I just wanted to mention something. I stupidly assumed that when the dealer changed my timing belt the first time around that they would do all the idlers too, which they did not. I ended up going around 190k total on them before doing my timing belt myself the second time, which was a stupid gamble to run the oem idlers that long.

SKFhigh temperature bearingspdf

The average price of a wheel bearing replacement can vary depending on location. Get a free detailed estimate for a wheel bearing replacement in your area ...

NTNhightempbearings

When I was in for warranty repair, the dealer proactively gave me $1500 quote. The Turbo models are more difficult because you have to remove downpipe or exhaust manifold/turbo assemble to access the all water pump bolts. The charge pipe, air intake pipes, hoses make for a more difficult timing belt job as well.

May 6, 2018 — AA163 Flight Tracker - Track the real-time flight status of AA 163 live using the FlightStats Global Flight Tracker.

checked parts.subaru.com - msrp for the 3 idlers, tensioner, belt, and water pump is $635.27. Coolant is $25.96 per gallon and you need 2. So that's $687.29 in parts and fluid.

I am getting prepped to do the timing belt on my car as well - I bought the 6starbernie kit (OEM tensioner, all OEM idlers (direct from manuf), Mitsuboshi belt), waiting on some miscellaneous stuff (OEM upper/lower rad hose, serpentine belt, plugs), have a camlock tool for the drivers side cams, and a torque solution crank pulley tool. Pretty sure I am good to go once it all gets here. (opting to forego the waterpump since the car only has 74k miles and that getting the wp on the GT is a bit more than I feel like dealing with this go-around) - oddly enough, the thermostat is on national backorder (appears to be unique to the 5th gen GT) - definitely pulling the radiator, etc. to make room. I'll use a feeler gauge for the belt guides (spec is 1mm +/- 0.5mm, so not a bit deal). Need to pick up coolant, then I'll have everything.

I think 1400 is a bit high. I can buy the whole kit for I think 275 from rock auto. The idler pulley should be included for that price. I guess I will call the dealership to get more details.

2005 Honda Accord · Main Image - Front Wheel Bearings.

SKF 22234 CC/W33. Category:Spherical roller bearings. Material:Standard bearing steel. Seal:None, open bearing. All Product Photos For Reference Only, ...

I used the Continental kit and GMB tensioner, ended-up getting quite the shock when I pulled the timing belt covers off and found tons of rubber shavings. All of the small guides on the inner cover corners were digging into the existing timing belt. Readjusted all of them using the spacer tool provided for reinstallation of the main timing belt guide.

The average cost for a Wheel Hub Assembly Replacement is between $440 and $554. Labor costs are estimated between $117 and $148 while parts are priced between ...

Radial axial bearings are crucial components used to support and position rotating mechanical parts. They can withstand axial and radial loads from two ...

On a brighter note I am in the process of building koni/H&R spring setup with the sti group n front strut mounts and forester rear strut mounts. I am almost finished and I can definitely swap out that on the street.