Installation is carried out by a Mil-tek technician. Your H501 Baler will be installed in the most optimal position to facilitate workflow.

Roller Bearing have a split-sleeve hardened spring steel outer race combined with a hardened roller and cage assembly for higher load capacities

Roller bearings are the standard bearing for general duty applications; they are cost effective and best bearing for abusive and shock load applications.Not recommended for applications where side thrust is present or on rigid casters used in constant circular turns. Requires periodical lubrication Acceptable for high temperature applications when used with metal retainer washers.

The Mil-tek H501 is one of the most effective hydraulic balers on the market making bales of over 990lbs that fit perfectly on a standard pallet.

ABC Lavpris are a supermarket chain in Denmark. They use a Mil-tek H600 to bale large volumes of cardboard and plastic packaging waste.

Fill the chamber with cardboard or plastic and close the door. Once the door is securely closed, the machine is activated and the minimizing has begun.

Zain Al Madina is a waste collection service in Dubai. They use a Mil-tek H500 to bale cardboard, plastic and expandable polystyrene, amongst other material.

This website uses cookies. They are harmless and are used for anonymous traffic measurement. By using our site, you agree to our use of cookies OK

Most Mil-tek machines are pneumatic rather than hydraulic, and as such are extremely quiet. The H501 and H600 are the only hydraulic machines in the range, and as such have a noise level of 70 dB, similar to that of a vacuum cleaner.

Food processing facilities handle large volumes of plastic and packaging in their production process. The H501 Mill Size Baler can be installed indoors, to improve workflow and logistics. The underside is designed so that the machine can also be easily moved using an appropriately sized forklift.

The extra long piston stroke and large door-opening allows for loading of large volumes of material including whole cardboard boxes, PET plastic or packaging foam.

Many distribution centers handle large volumes of surplus packing both in-house and via their delivery fleet. Placing a H501 Baler close to the unpacking area will convert a logistical headache to a neat and simple solution. Despite its large size, it has a relatively small footprint; smaller than two standard pallets.

The baler is designed to make extremely dense, recycle-ready bales of either cardboard or plastic that can be then sent directly to mills for final recycling.

The H501 Mill Size Baler and H600 Mill Size Baler are similar in size and footprint, but the H600 Mill Size Baler handles greater volumes and produces heavier bales. What you need to know is the approximate amount of waste you generate every day, in what stream and in what sizes it comes. This basic information combined with your business set-up forms the basis for evaluating which model machine you need.

If you need assistance in properly calculating the total capacity of your caster requirements, please contact us at (800) 222-7837 or sales@albionallen.com for expert advice in guiding you with the right caster for your application.

This product may contain chemicals known to the state of CA to cause cancer, and birth defects or other reproductive harm.

Your internal working processes and the data available on your waste streams will provide you with that answer. Together with Mil-tek, we will ensure you find the optimal spot in your workplace.

The machine can stand either indoors or out - most important is that you place the machine so that you sort your trash at source. If you place the machine outside it must be under a roof. Be aware that cold weather conditions can influence the performance of the machine. Your Mil-tek consultant will help analysing the best place to install the machine.

The wide door and deep chamber of the Mil-tek H501 baler means large volumes of cardboard can be baled without the need for breaking down or flat packing. The strength of the machine means that it can cater for many types of material, including foam, polystyrene and hard plastic such as PET bottles.