6005bearing

The Deep Groove Ball Bearing, known as 6205-14 Generic, has an inner diameter of 25 mm, an outer diameter of 52 mm and a thickness of 14 mm.

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

62052Z

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

6209bearing

Some Honda timing belts aren’t the traditional timing belt, but instead are timing chains. This will depend on the model year of the vehicle and a few other factors. Timing chains typically last longer than timing belts, but if they fail they can cause more damage.

Still have questions about your Honda timing belt? Feel free to Contact Us at the Wesley Chapel Honda service center and talk to one of our certified technicians! Feel free to pay us a visit near Zephyrhills and Spring Hill. You can order genuine Honda parts, and check out our parts specials!

Timing belts, also referred to as cambelts, play an important role in operating your internal combustion engine. Your Honda Accord timing belt harmonizes camshaft and crankshaft rotation; as long as both are in sync, the valves and pistons can operate properly. The valves control air/fuel mixture intake and exhaust gas and push the pistons down as fuel ignites in the combustion chamber. If you are driving a new Honda or any other model, a healthy cambelt is a must.

62052RS

If you aren’t sure whether you need a replacement, we’ll go over some of the red flags that are signs you need to schedule a replacement in Wesley Chapel:

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

When you are replacing your Honda timing belt in your Civic, the intervals will change per model year. The Honda Civic timing belt, which equips models in the years 1996 – 2000 have a recommended timing belt replacement interval of 105,000 miles or 7 years. Model years 2001 – 2005 Civic require replacement at 110,000 miles or 7 years. From 2006 to present day the Honda Civic is equipped with a timing chain that won’t need replacement.

0,81 € excl. VAT / piece

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.

6204bearing Dimensions

The Honda Accord timing belt needs replacement every 60,000 to 100,000 miles. From 2018 to the present, your Honda Accord will have a timing chain, but those specs vary a bit for previous model years. Here are the details:

The Honda Pilot timing belt should be replaced around 90,000 miles. They can often last longer, but it’s usually a good idea to replace them before that time.

6206bearingKG

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

The Deep Groove Ball Bearing, known as 6205-14 Generic, has an inner diameter of 25 mm, an outer diameter of 52 mm and a thickness of 14 mm.

The Deep Groove Ball Bearing, known as 6205-14 Generic, has an inner diameter of 25 mm, an outer diameter of 52 mm and a thickness of 14 mm.

6206bearing

1 Flush $10 Off | 2 Flushes $25 Off | 3 Flushes $60 Off Any fluid exchange: Power Steering, Induction, Transmission, Brake, and Coolant. (Excludes oil change)

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

If a timing belt breaks, the valves won’t open and close at the correct time. They’ll hit the pistons, and your car could need up to $2,000+ in repairs if the valves, water pump, and pistons were damaged. If no damage has occurred, Land O' Lakes drivers will pay around $500 to $1,000 with parts and labor costs. Most manufacturers recommend replacing the belt every 60,000 miles to 100,000 miles.

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.