Aa958

The Extreme Bearing blocks can absorb expansion of the shaft because there is an adjustment or locating ring in the bearing housing.

A situation can arise where extreme axial displacement is required or a linear movement is required through the bearing unit. For this situation you can choose an Extreme Bearing with a Cylindiche bore without a locking adapter

Aa 910 flight status

Calculate the maximum shaft length depending on the temperature in your application. In case you need to mount a long shaft, it is necessary to calculate the thermal expansion or contraction and adjust the bearing position to take this into account. As an example, a stainless steel shaft of 1 metre will become 0.023 mm longer when the temperature rises by 1°C and a carbon steel shaft of 1 metre will become 0.016 mm longer when the temperature rises by 1°C. The table shows the maximum shaft length depending on how the temperature changes during operation after the time of installation.

Aa910seating

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

We have an issue in one installation of our tipping buckets, where we have installed your bearings. We have 3 tipping buckets installed in a storm tank, each is suspended from 2 bearings.

Aa553

It is possible that the standard option in our Extreme bearings is not sufficient, because your construction has very long shafts, large temperature difference or other causes. in this case we supply an extra extension ring that fits between the bearing unit and the cap.

This website is not affiliated with or sponsored by Akai. To purchase AA-910 spares or accessories, please contact the company via their website or visit an authorised retailer.

AA292

Our opinion and our advice are not guaranteed and Extreme Bearing shall not be liable for the consequences of any damages caused by incorrect advice or the contents of this website. The customer is responsible for checking that the right choice of Extreme Bearing product has been made to match their actual working conditions and dimensions.

Our opinion and our advice are not guaranteed and Extreme Bearing shall not be liable for the consequences of any damages caused by incorrect advice or the contents of this website. The customer is responsible for checking that the right choice of Extreme Bearing product has been made to match their actual working conditions and dimensions.

Tipping buckets are filled with water, and when they are full, they tip due to their geometry, and make a wave to clean the surface. The issue is the following: We have all the bearings tighten to the axis, and we found that the buckets are moving horizontally through the bearings.

Extreme Bearing B.V.Hoofdstraat 45 ANL04441 AA Ovezande,The Netherlandsinfo@extremebearing.com+31 854 013 889Chamber of commerce 82408599

Aa910departures

Aa910seating chart

Contact:Extreme Bearing B.V.Hoofdstraat 45 ANL04441 AA Ovezande,The Netherlandsinfo@extremebearing.com+31 854 013 889Chamber of commerce 82408599

The locating ring can be removed from a bearing block of a pair placed opposite each other so that bearing axial displacement is possible.

The seats of an Extreme Bearing are machined to a tolerance in order to provide a loose fit. The bearing seats in the housings are sufficiently wide to allow the bearing axial displacement and likewise to accommodate for thermal expansion of the shaft due to high temperatures.

There is a total clearance available for thermal expansion that is equal to the thickness of the location ring. The expansion and contraction of material must be considered in order to maintain the clearance that is required to operate the bearing well. In the diagram, the clearance for contraction by cooling is indicated by C and the clearance for expansion by heating is indicated by B. The table shows the maximum values for C and B depending on the diameter of the shaft.

Tipping bucket is an element to clean the surface of storm tanks. When a storm happens, the storm tank is filled by water, and after the storm, once it is empty, it is necessary to clean the surface due to the sediments.