2002 Silverado. Im not a mechanic but i can usually figure most things out on my own. I can do things like my brakes, rotors, regular maintenance, oil changes, spark plugs etc. Is a wheel bearing pretty easy, meaning like just remove a few screws and pop the new hub in. Or is it more complicated than that and I should just take it to a mechanic?

One way clutchprice

One way ClutchBearing

This One-Way Clutch equipped with 8T pinion gears transmits power in only one rotation direction. One-way clutches are commonly used in industrial machinery and ... Learn more

This One-Way Clutch equipped with 8T pinion gears transmits power in only one rotation direction. One-way clutches are commonly used in industrial machinery and robots, etc. This one-way clutch has numerous and potential uses, for creative construction hobbyists. • One-Way Clutch transmits power in only one rotation direction. (Power can be transmitted in both clockwise and counter-clockwise rotations depending upon assembly.) • Compatible with 2mm and 3mm hex shafts and 4mm threaded shafts, and can be attached to universal plates and the like. • Can be directly attached to universal plates and arms. • Includes 2x45/3x27/3x60 mm hex shafts and 3x8mm tapping screws. • Case diameter: about 21.2mm, height: about 20mm. Weight: about 2.8g. • NOTE: This set requires a separately sold gearbox and materials such as universal plates, offered by Tamiya, and cannot be used alone.