Our wide range of gas leak detectors and leak detection equipment includes innovative helium leak detectors, hydrogen leak detectors, vacuum leak detectors, refrigerant leak detectors and much more, for a variety of markets and applications.

Accessory to the Extrima, Ex-certified Hydrogen Leak detector, for injecting tracer gas into fuel leaks during maintenance of aircrafts

Features: • Powerful magnets for fast and easy attachment• Facilitates simultaneous adjustment of tension and alignment• Can be used on almost all machines using V belts, banded belts, ribbed belts, and most other belts as well as chain sprockets• Red laser for measurement distances up to 3 m (10 ft)• Sturdy aluminum housings help ensure assembly stability and accuracy during the alignment process.

The portable Extrima Leak Detector is the ultimate intrinsically safe instrument for leak detection in the toughest environments, including hazardous locations such as Zone 0.

Large, easy-to-read LCD display can not only pinpoint the leak location, but help quantify the leak size using the PPM reading.

The ultimate in mobile vacuum leak detection designed to meet the most critical and demanding leak detection applications and in particular large volumes

Calibrated test leaks enable to test and to calibrate refrigerant sniffer leak detectors for the highest quality demands in leak detection

Laser power: <1 mW, class 2 Laser line length: 2 m at 2 m Measurement distance: 50 mm to 3 m Measurement accuracy angular: Better than 0.02° at 2 m Measurement accuracy offset: Better than 0.5 mm Mounting: Magnetic, side-mounted V-groove guides: N/A Operation time: 25 hours continuous operation Transmitter unit: 169 x 51 x 37 mm 365 g Receiver unit: 169 x 51 x 37 mm 340 g Reflector dimensions: 22 x 32 mm Battery: 2x AAA Alkaline type IEC LR03 Calibration certificate: Valid for two years Housing material: Aluminum, powder coat finish IP rating: IP40 Operating temperature: 0 to 40 °C Storage temperature: -20 to +60 °C Relative humidity: 10 to 90%, non-condensing Contents: 1x TKBA 10 transmitter unit; 1x TKBA 10 receiver unit; 2x AAA batteries; 1x Printed instructions for use; 1x Calibration certificate Case dimensions: 260 x 85 x 180 mm

If you have shopped with us before, please enter your details below. If you are a new customer, please proceed to the Billing section.

Calibrated test leaks enable to test and to calibrate refrigerant sniffer leak detectors for the highest quality demands in leak detection

New levels of productivity and reliability to the final leak testing of refrigerators, freezers, automotive air conditoners and similar products.

With the ELT3000 PLUS Battery Electrolyte Leak Detector, INFICON offers a unique, non-destructive leak testing solution for all Lithium-ion battery cells, including fragile pouch cells.

This accessory to Sensistor Sentrac Hydrogen Leak Detector allows you to do automatic leak testing with hydrogen tracer gas

Enable to test and to calibrate the helium sniffer leak detector Protec P3000(XL)  and XL3000flex for the highest quality demands in leak detection

Cost efficient forming gas or helium for accumulation leak testing, very sensitive and can detect leaks down to the 10-5 mbar∙l/s range

Cover a wide range of leak rates to suit your specific application and include bigger leaks (Types A-C) and smaller leaks (Types E and G). Leak Type A is intended for accumulation testing only

T-Guard2 Leak Detection Sensor closes the gap between costly hard vacuum helium leak detection and low sensitivity leak testing methods like waterbath and pressure decay.

Description: The SKF Belt Alignment Tool TKBA 10 allow pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley. A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.