Use the socket set to remove the bolts securing the hub assembly to the steering knuckle or axle. Carefully detach the hub assembly from the vehicle, exposing the wheel bearings.

Autotronics, Inc. manufactures a line of internal bearing pullers for use on miniature bearings with inside diameters ranging in size from 1/16 to 3/4 in.; metrics include 2.5mm to 11mm. These pullers are especially effective for blind holes where two or three arm pullers cannot be used.

SmallBearing PullerKit

Pullers are available individually or in sets. The sets are defined by size. The sizes are: 3/32″, 1/8″, 3/16″, 1/4″ and 5/16″ for the small English set and 3mm, 4mm, 5mm, 6mm, and 7mm for the small metric set. The large English set comprises 3/8″, 1/2″, 5/8″ and 3/4″, while the large metric set includes 8mm, 10mm, 12mm, and 15mm pullers.

Slide the greased bearings onto the spindle and secure them with the castle nut. Tighten the nut until snug, then back it off slightly to align the cotter pinhole. Insert a new cotter pin through the hole and bend it to secure the nut.

ArmatureBearing puller

Reattach the hub assembly to the steering knuckle or axle bearings using the socket set. Now, tighten the bolts securely.

A worn-out bearings can lead to various signs that indicate the need for replacing car’s wheel bearing. Here are some common signs you need to change your car’s wheel bearings:

The use of a puller minimizes impact damage and lessens the incidence of brinnelled bearings and damaged raceways. Autotronics bearing pullers are made from high tensile strength hardened tool steel, have knurled handles, and are for metric and inch diameter bearings.

Small InnerBearing puller

Once you assemble, it is important to test drive your car to ensure that the new wheel bearings function properly. Listen for any unusual noises and pay attention to the overall performance of the wheels.

Once the hub assembly is removed, take out the old wheel bearings. Depending on your vehicle, you may need pliers to remove the cotter pin and castle nut securing the bearings. Now, carefully slide the old bearings off the spindle.

Small GearPuller

Place the wheel back onto the vehicle and hand-tighten the lug nuts. Lower the vehicle to the ground using the jack and then tighten the lug nuts in a crisscross pattern with the lug wrench.

The vehicle’s wheel bearings are crucial in ensuring smooth and efficient wheel rotation. However, over time these bearings may wear out, leading to issues such as noise, vibration and compromised safety. That said, changing wheel bearings is a manageable task that can save money on professional repairs. Let’s explore the step-by-step process of changing your wheel bearings.

This is all about steps to change a car’s wheel bearing. Changing your car’s wheel bearings is a task that can be accomplished with the right tools and a bit of patience. Keeping a car maintenance schedule and timely replacement of wheel bearings can contribute to the longevity and safety of your vehicle. If you’re unsure about any step in the process, consult your vehicle’s manual or seek professional assistance.

Blind HoleBearing puller

SmallbearingracePuller

Inspect the spindle and hub assembly for any signs of damage. Clean the components thoroughly, removing any old grease or debris. Inspect the races for wear and if necessary, use a bearing race and seal driver set to install new races.

Apply wheel bearing grease to the new bearings. Ensure that the bearings are evenly coated with grease to promote smooth operation.

If you are planning to buy used cars for sale in the UAE, make sure you take a test drive. A test drive will help you observe the signs of damaged wheel bearings or other car parts.

Identify the location of the wheel bearings on your vehicle. Typically, they are situated within the hub assembly. If your vehicle has a drum brake system, you’ll need to remove the drum to access the wheel bearings. Moreover, if you’re unsure about the type of brakes equipped in your vehicle, distinguishing between drum and disc brakes is essential. Here’s a straightforward guide to help you identify them.

Use the jack to lift the vehicle off the ground and secure it with jack stands. Make sure to lift the car high enough to provide sufficient clearance for working on the wheel. Here is how you can safely use a car jack

Before you start the car, ensure the vehicle is parked on a flat surface and engage the parking brake. Safety should be a top priority. It is recommended to wear appropriate personal protective equipment such as gloves and safety glasses.