CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

Tk80seat map

Here’s everything you need to know about Uber Boat-Hailing is this exciting initiative. Uber’s launch of a boat-hailing service on

VOX (Voice Operated Xmit) is another feature that makes the TRC-80/TK-80 convenient and easy to use.  And with the optional PC-1A Phone Patch Interface it provides telephone patch capabilities as well. Data Mode at the touch of a button allows computer communications on USB/LSB at up to 300 bps in AFSK or FSK modes.  Useful for data acquisition, text-based file transfers and other low-speed data communications applications. Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

The TRC-80's/TK-80 design combines a high-performance HF transceiver with elegant user simplicity, all rolled into a tough, compact package that will deliver many years of dedicated field service. The large backlit LCD display provides high visibility in most lighting conditions, with alphanumeric channel designations up to 7 characters, frequency, memory channel number, mode, signal meter, and transmit indicator. 80 Memory channels are available for custom set-up of transceiver and monitoring frequencies. Memory Channel Scan features carrier-operated and time-operated modes; receive threshold for both can be dynamically controlled by adjusting the squelch volume. Selective Calling System is an option (KPE-1 required) that enables individual, group or open calling, and is ideal for distributed networks of HF transceivers. VOX (Voice Operated Xmit) is another feature that makes the TRC-80/TK-80 convenient and easy to use.  And with the optional PC-1A Phone Patch Interface it provides telephone patch capabilities as well. Data Mode at the touch of a button allows computer communications on USB/LSB at up to 300 bps in AFSK or FSK modes.  Useful for data acquisition, text-based file transfers and other low-speed data communications applications. Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

MAIN FEATURES Extremely rugged design for reliable service even in remote areas 500 kHz to 30 MHz continuous receiver coverage 1.8 MHz to 30 MHz transceiver coverage within legal spectrum allocations 80 channel memory fop frequency, mode and RF power setting Simple to operate with lapge LCD display and memory channel scan Adjustable RF power output in 4 increments 15W, 25W, 50W and 100W lnternal and external antenna tuner options Data Communications capable up to 300 bps AFSK/FSK Optional Selective Call System (with optional KPE-1) VOX capability with optional Phone Patch interface OTHER FEATURES  The TRC-80's/TK-80 design combines a high-performance HF transceiver with elegant user simplicity, all rolled into a tough, compact package that will deliver many years of dedicated field service. The large backlit LCD display provides high visibility in most lighting conditions, with alphanumeric channel designations up to 7 characters, frequency, memory channel number, mode, signal meter, and transmit indicator. 80 Memory channels are available for custom set-up of transceiver and monitoring frequencies. Memory Channel Scan features carrier-operated and time-operated modes; receive threshold for both can be dynamically controlled by adjusting the squelch volume. Selective Calling System is an option (KPE-1 required) that enables individual, group or open calling, and is ideal for distributed networks of HF transceivers. VOX (Voice Operated Xmit) is another feature that makes the TRC-80/TK-80 convenient and easy to use.  And with the optional PC-1A Phone Patch Interface it provides telephone patch capabilities as well. Data Mode at the touch of a button allows computer communications on USB/LSB at up to 300 bps in AFSK or FSK modes.  Useful for data acquisition, text-based file transfers and other low-speed data communications applications. Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

TK80Gate

Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

80 Memory channels are available for custom set-up of transceiver and monitoring frequencies. Memory Channel Scan features carrier-operated and time-operated modes; receive threshold for both can be dynamically controlled by adjusting the squelch volume. Selective Calling System is an option (KPE-1 required) that enables individual, group or open calling, and is ideal for distributed networks of HF transceivers. VOX (Voice Operated Xmit) is another feature that makes the TRC-80/TK-80 convenient and easy to use.  And with the optional PC-1A Phone Patch Interface it provides telephone patch capabilities as well. Data Mode at the touch of a button allows computer communications on USB/LSB at up to 300 bps in AFSK or FSK modes.  Useful for data acquisition, text-based file transfers and other low-speed data communications applications. Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

TK80terminal

Wheel bearing replacement costs can vary depending on various factors, including vehicle make and model, type of wheel bearings, quality of replacement parts, labour costs, and additional components. By understanding these factors and budgeting accordingly, you can ensure timely replacement of worn or damaged wheel bearings, preserving your vehicle’s safety and performance. Consult with a qualified mechanic or automotive service provider for an accurate assessment of your vehicle’s wheel bearings and personalized recommendations for replacement.

TK800

All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

Replacing worn or damaged wheel bearings is essential for maintaining vehicle safety, stability, and ride comfort. Delaying wheel bearing replacement can lead to increased risk of wheel failure, loss of vehicle control, and potential accidents. Regular inspection of your vehicle’s wheel bearings and prompt replacement of worn or damaged components can help prevent costly repairs and ensure a safe driving experience.

Selective Calling System is an option (KPE-1 required) that enables individual, group or open calling, and is ideal for distributed networks of HF transceivers. VOX (Voice Operated Xmit) is another feature that makes the TRC-80/TK-80 convenient and easy to use.  And with the optional PC-1A Phone Patch Interface it provides telephone patch capabilities as well. Data Mode at the touch of a button allows computer communications on USB/LSB at up to 300 bps in AFSK or FSK modes.  Useful for data acquisition, text-based file transfers and other low-speed data communications applications. Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

Tk80plane type

Data Mode at the touch of a button allows computer communications on USB/LSB at up to 300 bps in AFSK or FSK modes.  Useful for data acquisition, text-based file transfers and other low-speed data communications applications. Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

TK80flight tracker

Understanding the costs associated with wheel bearing replacement is crucial for maintaining your vehicle’s safety and performance. In this guide, we’ll explore the factors influencing wheel bearing replacement costs and provide insights to help you budget effectively. Wheel bearings are vital components in your vehicle’s suspension system, responsible for allowing the wheels to rotate smoothly while supporting the weight of the vehicle. Over time, wheel bearings can wear out due to continuous use, high mileage, or exposure to harsh driving conditions. When wheel bearings fail, they can lead to various issues typical tell-tale sign noisy operation rarely or mostly never abnormal tire wear, steering instability.

TK80SFO terminal

Learn more about used car buying, car maintenance, car selling and find information about driving articles from vehicle inspection experts.

OTHER FEATURES  The TRC-80's/TK-80 design combines a high-performance HF transceiver with elegant user simplicity, all rolled into a tough, compact package that will deliver many years of dedicated field service. The large backlit LCD display provides high visibility in most lighting conditions, with alphanumeric channel designations up to 7 characters, frequency, memory channel number, mode, signal meter, and transmit indicator. 80 Memory channels are available for custom set-up of transceiver and monitoring frequencies. Memory Channel Scan features carrier-operated and time-operated modes; receive threshold for both can be dynamically controlled by adjusting the squelch volume. Selective Calling System is an option (KPE-1 required) that enables individual, group or open calling, and is ideal for distributed networks of HF transceivers. VOX (Voice Operated Xmit) is another feature that makes the TRC-80/TK-80 convenient and easy to use.  And with the optional PC-1A Phone Patch Interface it provides telephone patch capabilities as well. Data Mode at the touch of a button allows computer communications on USB/LSB at up to 300 bps in AFSK or FSK modes.  Useful for data acquisition, text-based file transfers and other low-speed data communications applications. Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

TK80gate info

MAIN FEATURES Extremely rugged design for reliable service even in remote areas 500 kHz to 30 MHz continuous receiver coverage 1.8 MHz to 30 MHz transceiver coverage within legal spectrum allocations 80 channel memory fop frequency, mode and RF power setting Simple to operate with lapge LCD display and memory channel scan Adjustable RF power output in 4 increments 15W, 25W, 50W and 100W lnternal and external antenna tuner options Data Communications capable up to 300 bps AFSK/FSK Optional Selective Call System (with optional KPE-1) VOX capability with optional Phone Patch interface OTHER FEATURES  The TRC-80's/TK-80 design combines a high-performance HF transceiver with elegant user simplicity, all rolled into a tough, compact package that will deliver many years of dedicated field service. The large backlit LCD display provides high visibility in most lighting conditions, with alphanumeric channel designations up to 7 characters, frequency, memory channel number, mode, signal meter, and transmit indicator. 80 Memory channels are available for custom set-up of transceiver and monitoring frequencies. Memory Channel Scan features carrier-operated and time-operated modes; receive threshold for both can be dynamically controlled by adjusting the squelch volume. Selective Calling System is an option (KPE-1 required) that enables individual, group or open calling, and is ideal for distributed networks of HF transceivers. VOX (Voice Operated Xmit) is another feature that makes the TRC-80/TK-80 convenient and easy to use.  And with the optional PC-1A Phone Patch Interface it provides telephone patch capabilities as well. Data Mode at the touch of a button allows computer communications on USB/LSB at up to 300 bps in AFSK or FSK modes.  Useful for data acquisition, text-based file transfers and other low-speed data communications applications. Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

Memory Channel Scan features carrier-operated and time-operated modes; receive threshold for both can be dynamically controlled by adjusting the squelch volume. Selective Calling System is an option (KPE-1 required) that enables individual, group or open calling, and is ideal for distributed networks of HF transceivers. VOX (Voice Operated Xmit) is another feature that makes the TRC-80/TK-80 convenient and easy to use.  And with the optional PC-1A Phone Patch Interface it provides telephone patch capabilities as well. Data Mode at the touch of a button allows computer communications on USB/LSB at up to 300 bps in AFSK or FSK modes.  Useful for data acquisition, text-based file transfers and other low-speed data communications applications. Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

The cost of wheel bearing replacement can vary widely depending on the factors mentioned above. On average, you can expect to pay between £100 and £700 per wheel bearing, including parts and labor. Here’s a breakdown of potential costs the bigger the car the more expensive the bearing in perspective:

lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket

Buying a used VW. Buying used vauxhall, BMW, Jaguar, Ford, Volvo, Range rover, Bentley, Aston Martin, Porsche, Ferrari, Lamborghini, Maserati, Hyundai, Tesla, Honda, Pagani

The large backlit LCD display provides high visibility in most lighting conditions, with alphanumeric channel designations up to 7 characters, frequency, memory channel number, mode, signal meter, and transmit indicator. 80 Memory channels are available for custom set-up of transceiver and monitoring frequencies. Memory Channel Scan features carrier-operated and time-operated modes; receive threshold for both can be dynamically controlled by adjusting the squelch volume. Selective Calling System is an option (KPE-1 required) that enables individual, group or open calling, and is ideal for distributed networks of HF transceivers. VOX (Voice Operated Xmit) is another feature that makes the TRC-80/TK-80 convenient and easy to use.  And with the optional PC-1A Phone Patch Interface it provides telephone patch capabilities as well. Data Mode at the touch of a button allows computer communications on USB/LSB at up to 300 bps in AFSK or FSK modes.  Useful for data acquisition, text-based file transfers and other low-speed data communications applications. Tough aluminum monocoque chassis provides reliable performance year after year in adverse climatic conditions, from the Antarctic to the Amazon.  Meets MIL-STD 810D specifications. All mode General Coverage receiver from 500 kHz through 30 MHz continuous for easy monitoring of all HF bands. 100 Watts output with an antenna tuner gives you the punch needed to drive any antenna system.  The RF output is adjustable in 4 steps, 100W, 50W, 25W and 15W, which can be assigned to any memory channel.  The maximum output is also dealer-adjustable down to 50W, 25W and 15W. lnternal or External Antenna Tuner options gives you a flexible range of antenna choices.  The internal KAT-2 does not increase the size of the radio, and is ideal for yagi, ground plane and dipole type antennas.  The external KAT-1 is for mounting at the base of a periodic antennas such as whips and long wires. Advanced Intercept Point (AIP) feature expands dynamic range and minimizes cross-talk interference (dealer setting).  In addition, the Noise Blanker cuts pulse-type noise and the optional 500 Hz CW filter (YK-107C) reduces interference for morse code operation. CW full and semi break-in can be set with the key delay time control. The Clarifier allows fine adjustment of receive frequency for best audio clarity, set up by the dealer in either 10 Hz or 1Hz steps.   TECHNICAL SPECIFICATIONS   General TRC-80/New Model TK-80 Frequency Range, MHz Transmitter: 1.8-30 / Receiver: 0.5-30 Modes J3E/SSB, A1A/CW, A3E/AM, F1D/FSK, F2D/AFSK Antenna Impedance, ohm 50 Operating Voltage 13.6VDC Weight (net) 11.2 lbs (5.2 kg) Operating temp (-20C ~ +60C) RF Output, Watts SSB/CW/FSK: 100W   AM: 25W Included Accessories : Owner's manual, DC cable, Microphone, Fuses (25A/4A). Basic Associated Accessories: Below are some of the accessories that can be used with the Kenwood TK-80 model.Click the Accessory Catalog Button for complete and updated information on accessories for the TK-80. TAA10008ft Mobile Stainless Steel Whip Antenna with Base Mounting Kit KAT-1External Automatic Antenna Tuner (Single wire output - 100 Watt max) KAT-2Internal Automatic Antenna Tuner MC-60ADesktop Microphone HS-6Headphones KPE-1Selective Call Kit KIF-1SSB Filter 2.7 kHz SO-2Temperature Controlled Crystal Oscillator (TXCO) YK-107CCW Filter 500 Hz MB-430M2Mobile Mount Bracket