Probable cause, blockage in the metering valves, hose, tube, or connected component: Switch the pump on and loosen each outlet in the primary valve one at a time. The blocked outlet will start to discharge to its secondary valve. Repeat the process of loosening each outlet one at a time until the blocked feed line is detected.Retighten all outlets.Repair the component blockage if found.If a metering valve is creating the blockage, replace the metering valve.

GreaseAlert is an exclusive Industrial Internet of Things (IIoT) remote lubrication monitoring system. It proactively communicates with equipment managers alerting them to potential problems and avoiding catastrophic failures.

Replace the complete hose or tube. Or, if the tube is broken, cut the tube at break and repair using tube union (part #244058). If the hose is broken, cut ends at the break and install new reusable hose ends (part #246002) and screw into a 1/8″ NPT female connector (part #67063).

Probable cause, blockage in the metering valves, hose, tube, or connected component: Switch the pump on and loosen each outlet in the primary valve one at a time. The blocked outlet will start to discharge to its secondary valve. Repeat the process of loosening each outlet one at a time until the blocked feed line is detected. Retighten all outlets.Repair the component blockage if found. If a metering valve is creating the blockage, replace the metering valve.

The Lincoln P203 Manual provides information on safety, functions, technical data, installation, operation, and more. If you’d rather talk to a person than read a document, we’re always here to help!

Financial responsibility of the driver or owner is established if the driver or owner of the vehicle involved in an accident described in Section 16000 is:

(f) In compliance with the requirements authorized by the department by any other manner which effectuates the purposes of this chapter.

The P203 lubrication pump is versatile, compact and economical. It can supply up to 150 lubrication points, depending on the line length. It consists of a housing with integrated motor, reservoir with stirring paddle, pump element with pressure-relief valve, filling nipple and electrical connection parts. This powerful pump can drive up to three pump elements and can be equipped with a low-level control (with or without control board).

(b) An insured or obligee under a form of insurance or bond that complies with the requirements of this division and that covers the driver for the vehicle involved in the accident.